On 2022/12/27 20:22, William Qiu wrote: > Hi, > > This patchset adds initial rudimentary support for the StarFive > designware mobile storage host controller driver. And this driver will > be used in StarFive's VisionFive 2 board. The main purpose of adding > this driver is to accommodate the ultra-high speed mode of eMMC. > > The last patch should be applied after the patchset [1]: > [1] https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@xxxxxxxxxxxxxxxx/ > > Changes since v1: > - Renamed the dt-binding 'starfive,jh7110-sdio.yaml' to 'starfive,jh7110-mmc.yaml'. > - Changed the type of 'starfive,syscon' and modify its description. > - Deleted unused head files like '#include <linux/gpio.h>'. > - Added comment for the 'rise_point' and 'fall_point'. > - Changed the API 'num_caps' to 'common_caps'. > - Changed the node name 'sys_syscon' to 'syscon'. > - Changed the node name 'sdio' to 'mmc'. > > The patch series is based on v6.1-rc5. > > William Qiu (3): > dt-bindings: mmc: Add bindings for StarFive > mmc: starfive: Add sdio/emmc driver support > riscv: dts: starfive: Add mmc node > > .../bindings/mmc/starfive,jh7110-mmc.yaml | 72 +++++++ > MAINTAINERS | 6 + > .../jh7110-starfive-visionfive-v2.dts | 25 +++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 38 ++++ > drivers/mmc/host/Kconfig | 10 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-starfive.c | 185 ++++++++++++++++++ > 7 files changed, 337 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml > create mode 100644 drivers/mmc/host/dw_mmc-starfive.c > > -- > 2.34.1 > Hi Rob/Jaehoon, Could you please help to review and provide comments on this patch series? Thank you in advance. Best regards, William Qiu
