[PATCH v2 3/3] arm64: dts: qcom: sm6350: Set up DDR & L3 scaling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. DDR clock rates come from the vendor kernel.

Available values from the HW LUT:
300000000
556800000
652800000
806400000
844800000
940800000
1132800000
1209600000
1286400000
1401600000
1459200000

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
Make sure to tag the paths with an ACTIVE moniker, so that the poor
thing doesn't spontaneously decide to vote for 8GiB/s of DDR bandwith
while sleeping..

 arch/arm64/boot/dts/qcom/sm6350.dtsi | 140 +++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225.dtsi |  19 ++++
 2 files changed, 159 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 893a1ffb5e3d..94a6f6cdfdd6 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm6350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -49,6 +51,10 @@ CPU0: cpu@0 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -68,6 +74,10 @@ CPU1: cpu@100 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -84,6 +94,10 @@ CPU2: cpu@200 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -100,6 +114,10 @@ CPU3: cpu@300 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -116,6 +134,10 @@ CPU4: cpu@400 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -132,6 +154,10 @@ CPU5: cpu@500 {
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -149,6 +175,10 @@ CPU6: cpu@600 {
 			dynamic-power-coefficient = <703>;
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -165,6 +195,10 @@ CPU7: cpu@700 {
 			dynamic-power-coefficient = <703>;
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -222,6 +256,112 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
index 7b2a002ca7ff..b7b4044e9bb0 100644
--- a/arch/arm64/boot/dts/qcom/sm7225.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -14,3 +14,22 @@
 &CPU5 { compatible = "qcom,kryo570"; };
 &CPU6 { compatible = "qcom,kryo570"; };
 &CPU7 { compatible = "qcom,kryo570"; };
+
+&cpu0_opp_table {
+	opp-1804800000 {
+		opp-hz = /bits/ 64 <1804800000>;
+		opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
+
+&cpu6_opp_table {
+	opp-2131200000 {
+		opp-hz = /bits/ 64 <2131200000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+
+	opp-2208000000 {
+		opp-hz = /bits/ 64 <2208000000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
-- 
2.39.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux