Re: [PATCH v4 1/5] hwmon: (gxp-fan-ctrl) Add GXP fan controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 03, 2023 at 02:36:50PM -0600, nick.hawkins@xxxxxxx wrote:
> From: Nick Hawkins <nick.hawkins@xxxxxxx>
> 
> The GXP SoC can support up to 16 fans through the interface provided by
> the CPLD. The current support is limited to 8 fans. The fans speeds are
> controlled via 8 different PWMs which can vary in value from  0-255. The
> fans are also capable of reporting if they have failed to the CPLD which
> in turn reports the status to the GXP SoC.
> 
> Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx>

Applied, with two minor changes (see below)

> ---
> v4:
>  *Removed unecessary HWMON_PWM_ENABLE
> v3:
>  *Removed use of regmap in favor of __iomem
>  *Removed use of dev and hwmon_dev from drvdata structure
>  *Fixed missing breaks in switch statements
>  *Added check for pwm values less than 0
>  *Removed regmap and slab header file includes
> v2:
>  *Changed number of supported fans from 16 to 8 in code
>  *Remove last sentence of commit description
>  *Removed support for fan[0-15]_input in code and documentation
>  *Changed documentation to limit fan count to 7
>  *Changed documentation license
>  *Removed PWM defines
>  *Added gxp-fan-ctrl to hwmon's index.rst
>  *Removed mutex
>  *Added fan_enable support to report if the fan is enabled
>  *Changed presents to present
>  *Removed unnecessary ()
>  *Add comment for plreg reads and calculations
>  *Add comment for the use of platform power state in code
>  *Removed use of variable offsets and went with hardcoding instead
>  *Rewrote driver to use devm_hwmon_device_register_with_info()
>  *Remove unused header files
>  *Fix GPL header
>  *Changed module description
>  *Add kfree in case of failure to get regmaps or resource
> ---
>  Documentation/hwmon/gxp-fan-ctrl.rst |  28 +++
>  Documentation/hwmon/index.rst        |   1 +
>  drivers/hwmon/Kconfig                |   9 +
>  drivers/hwmon/Makefile               |   1 +
>  drivers/hwmon/gxp-fan-ctrl.c         | 254 +++++++++++++++++++++++++++
>  5 files changed, 293 insertions(+)
>  create mode 100644 Documentation/hwmon/gxp-fan-ctrl.rst
>  create mode 100644 drivers/hwmon/gxp-fan-ctrl.c
> 
> diff --git a/Documentation/hwmon/gxp-fan-ctrl.rst b/Documentation/hwmon/gxp-fan-ctrl.rst
> new file mode 100644
> index 000000000000..ae3397e81c04
> --- /dev/null
> +++ b/Documentation/hwmon/gxp-fan-ctrl.rst
> @@ -0,0 +1,28 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver gxp-fan-ctrl
> +==========================
> +
> +Supported chips:
> +
> +  * HPE GXP SOC
> +
> +Author: Nick Hawkins <nick.hawkins@xxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +gxp-fan-ctrl is a driver which provides fan control for the hpe gxp soc.
> +The driver allows the gathering of fan status and the use of fan
> +PWM control.
> +
> +
> +Sysfs attributes
> +----------------
> +
> +======================= ===========================================================
> +pwm[0-7]		Fan 0 to 7 respective PWM value (0-255)
> +fan[0-7]_fault		Fan 0 to 7 respective fault status: 1 fail, 0 ok
> +fan[0-7]_enable         Fan 0 to 7 respective enabled status: 1 enabled, 0 disabled
> +======================= ===========================================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index c1d11cf13eef..97819cf5c97f 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -73,6 +73,7 @@ Hardware Monitoring Kernel Drivers
>     g762
>     gsc-hwmon
>     gl518sm
> +   gxp-fan-ctrl
>     hih6130
>     ibmaem
>     ibm-cffps
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 7ac3daaf59ce..45febd5d5cf7 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -706,6 +706,15 @@ config SENSORS_GPIO_FAN
>  	  This driver can also be built as a module. If so, the module
>  	  will be called gpio-fan.
>  
> +config SENSORS_GXP_FAN_CTRL
> +	tristate "HPE GXP fan controller"
> +	depends on ARCH_HPE_GXP || COMPILE_TEST
> +	help
> +	  If you say yes here you get support for GXP fan control functionality.
> +
> +	  The GXP controls fan function via the CPLD through the use of PWM
> +	  registers. This driver reports status and pwm setting of the fans.
> +
>  config SENSORS_HIH6130
>  	tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
>  	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 11d076cad8a2..b5782dc4dc6e 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
>  obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
>  obj-$(CONFIG_SENSORS_GSC)	+= gsc-hwmon.o
>  obj-$(CONFIG_SENSORS_GPIO_FAN)	+= gpio-fan.o
> +obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o
>  obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
>  obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
>  obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
> diff --git a/drivers/hwmon/gxp-fan-ctrl.c b/drivers/hwmon/gxp-fan-ctrl.c
> new file mode 100644
> index 000000000000..c7ebd3bbf35b
> --- /dev/null
> +++ b/drivers/hwmon/gxp-fan-ctrl.c
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
> +
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>

Use of BITS() asks for include of linux/bits.h

> +
> +#define OFS_FAN_INST 0 /* Is 0 because plreg base will be set at INST */
> +#define OFS_FAN_FAIL 2 /* Is 2 bytes after base */
> +#define OFS_SEVSTAT 0 /* Is 0 because fn2 base will be set at SEVSTAT */
> +#define POWER_BIT 24

Tab-aligned defines

> +
> +struct gxp_fan_ctrl_drvdata {
> +	void __iomem	*base;
> +	void __iomem	*plreg;
> +	void __iomem	*fn2;
> +};
> +
> +static bool fan_installed(struct device *dev, int fan)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u8 val;
> +
> +	val = readb(drvdata->plreg + OFS_FAN_INST);
> +
> +	return !!(val & BIT(fan));
> +}
> +
> +static long fan_failed(struct device *dev, int fan)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u8 val;
> +
> +	val = readb(drvdata->plreg + OFS_FAN_FAIL);
> +
> +	return !!(val & BIT(fan));
> +}
> +
> +static long fan_enabled(struct device *dev, int fan)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u32 val;
> +
> +	/*
> +	 * Check the power status as if the platform is off the value
> +	 * reported for the PWM will be incorrect. Report fan as
> +	 * disabled.
> +	 */
> +	val = readl(drvdata->fn2 + OFS_SEVSTAT);
> +
> +	return !!((val & BIT(POWER_BIT)) && fan_installed(dev, fan));
> +}
> +
> +static int gxp_pwm_write(struct device *dev, u32 attr, int channel, long val)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		if (val > 255 || val < 0)
> +			return -EINVAL;
> +		writeb(val, drvdata->base + channel);
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int gxp_fan_ctrl_write(struct device *dev, enum hwmon_sensor_types type,
> +			      u32 attr, int channel, long val)
> +{
> +	switch (type) {
> +	case hwmon_pwm:
> +		return gxp_pwm_write(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int gxp_fan_read(struct device *dev, u32 attr, int channel, long *val)
> +{
> +	switch (attr) {
> +	case hwmon_fan_enable:
> +		*val = fan_enabled(dev, channel);
> +		return 0;
> +	case hwmon_fan_fault:
> +		*val = fan_failed(dev, channel);
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int gxp_pwm_read(struct device *dev, u32 attr, int channel, long *val)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u32 reg;
> +
> +	/*
> +	 * Check the power status of the platform. If the platform is off
> +	 * the value reported for the PWM will be incorrect. In this case
> +	 * report a PWM of zero.
> +	 */
> +
> +	reg = readl(drvdata->fn2 + OFS_SEVSTAT);
> +
> +	if (reg & BIT(POWER_BIT))
> +		*val = fan_installed(dev, channel) ? readb(drvdata->base + channel) : 0;
> +	else
> +		*val = 0;
> +
> +	return 0;
> +}
> +
> +static int gxp_fan_ctrl_read(struct device *dev, enum hwmon_sensor_types type,
> +			     u32 attr, int channel, long *val)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return gxp_fan_read(dev, attr, channel, val);
> +	case hwmon_pwm:
> +		return gxp_pwm_read(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t gxp_fan_ctrl_is_visible(const void *_data,
> +				       enum hwmon_sensor_types type,
> +				       u32 attr, int channel)
> +{
> +	umode_t mode = 0;
> +
> +	switch (type) {
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_enable:
> +		case hwmon_fan_fault:
> +			mode = 0444;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +			mode = 0644;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return mode;
> +}
> +
> +static const struct hwmon_ops gxp_fan_ctrl_ops = {
> +	.is_visible = gxp_fan_ctrl_is_visible,
> +	.read = gxp_fan_ctrl_read,
> +	.write = gxp_fan_ctrl_write,
> +};
> +
> +static const struct hwmon_channel_info *gxp_fan_ctrl_info[] = {
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_FAULT | HWMON_F_ENABLE),
> +	HWMON_CHANNEL_INFO(pwm,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_chip_info gxp_fan_ctrl_chip_info = {
> +	.ops = &gxp_fan_ctrl_ops,
> +	.info = gxp_fan_ctrl_info,
> +
> +};
> +
> +static int gxp_fan_ctrl_probe(struct platform_device *pdev)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata;
> +	struct resource *res;
> +	struct device *dev = &pdev->dev;
> +	struct device *hwmon_dev;
> +
> +	drvdata = devm_kzalloc(dev, sizeof(struct gxp_fan_ctrl_drvdata),
> +			       GFP_KERNEL);
> +	if (!drvdata)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(drvdata->base))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->base),
> +				     "failed to map base\n");
> +
> +	drvdata->plreg = devm_platform_ioremap_resource_byname(pdev,
> +							       "pl");
> +	if (IS_ERR(drvdata->plreg))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->plreg),
> +				     "failed to map plreg\n");
> +
> +	drvdata->fn2 = devm_platform_ioremap_resource_byname(pdev,
> +							     "fn2");
> +	if (IS_ERR(drvdata->fn2))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->fn2),
> +				     "failed to map fn2\n");
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> +							 "hpe_gxp_fan_ctrl",
> +							 drvdata,
> +							 &gxp_fan_ctrl_chip_info,
> +							 NULL);
> +
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct of_device_id gxp_fan_ctrl_of_match[] = {
> +	{ .compatible = "hpe,gxp-fan-ctrl", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, gxp_fan_ctrl_of_match);
> +
> +static struct platform_driver gxp_fan_ctrl_driver = {
> +	.probe		= gxp_fan_ctrl_probe,
> +	.driver = {
> +		.name	= "gxp-fan-ctrl",
> +		.of_match_table = gxp_fan_ctrl_of_match,
> +	},
> +};
> +module_platform_driver(gxp_fan_ctrl_driver);
> +
> +MODULE_AUTHOR("Nick Hawkins <nick.hawkins@xxxxxxx>");
> +MODULE_DESCRIPTION("HPE GXP fan controller");
> +MODULE_LICENSE("GPL");



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux