Re: [RFC PATCH v2 00/11] clk: imx8mn: setup clocks from the device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/1/23 18:57, Dario Binacchi wrote:
The idea for this series was born back from Dublin (ELCE 2022) after
having attended the talk entitled "Updating and Modernizing Clock
Drivers" held by Chen-Yu Tsai and the availability of a board with
imx8mn SOC.

This series aims to setup all imx8mn's clocks from the device tree and
remove the legacy setup code with hardwired parameters.

I am well aware that the series lacks patches for the DT bindings. The
effort up to this point has been important and so I thought I'd ask for
feedback from the community before proceeding to implement them. If it
is positive I will add the DT binding patches starting from version 2.

The series has been tested on the BSH SystemMaster (SMM) S2 board:
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup

I might be wrong, but I vaguely recall AT91 (?) had this kind of massive clock tree description in DT and they then switched to much simpler clock description where the clock topology is encoded in the driver instead (like what iMX does right now). It might be worth having a look at that and the reasoning around that conversion.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux