On 2.01.2023 11:50, Johan Hovold wrote:
> The sound nodes in the SoC dtsi should be disabled by default.
>
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index ed1e2bee86ee..c1ce2d7b3675 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -1733,6 +1733,8 @@ rxmacro: rxmacro@3200000 {
>
> pinctrl-names = "default";
> pinctrl-0 = <&rx_swr_default>;
> +
> + status = "disabled";
> };
>
> /* RX */
> @@ -1760,6 +1762,8 @@ swr1: soundwire-controller@3210000 {
> #sound-dai-cells = <1>;
> #address-cells = <2>;
> #size-cells = <0>;
> +
> + status = "disabled";
> };
>
> txmacro: txmacro@3220000 {
> @@ -1783,6 +1787,8 @@ txmacro: txmacro@3220000 {
> #address-cells = <2>;
> #size-cells = <2>;
> #sound-dai-cells = <1>;
> +
> + status = "disabled";
> };
>
> wsamacro: codec@3240000 {
> @@ -1804,6 +1810,8 @@ wsamacro: codec@3240000 {
>
> pinctrl-names = "default";
> pinctrl-0 = <&wsa_swr_default>;
> +
> + status = "disabled";
> };
>
> /* WSA */
> @@ -1830,6 +1838,8 @@ swr0: soundwire-controller@3250000 {
> #sound-dai-cells = <1>;
> #address-cells = <2>;
> #size-cells = <0>;
> +
> + status = "disabled";
> };
>
> /* TX */
> @@ -1858,6 +1868,8 @@ swr2: soundwire-controller@3330000 {
> qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>;
> qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
> qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>;
> +
> + status = "disabled";
> };
>
> vamacro: codec@3370000 {
> @@ -1874,6 +1886,8 @@ vamacro: codec@3370000 {
> #clock-cells = <0>;
> clock-output-names = "fsgen";
> #sound-dai-cells = <1>;
> +
> + status = "disabled";
> };
>
> lpass_tlmm: pinctrl@33c0000 {
> @@ -1888,6 +1902,8 @@ lpass_tlmm: pinctrl@33c0000 {
> <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> clock-names = "core", "audio";
>
> + status = "disabled";
> +
> tx_swr_default: tx-swr-default-state {
> clk-pins {
> pins = "gpio0";
