Ivan T. Ivanov schrieb am 03.11.2014 16:24: > From: Stanimir Varbanov <svarbanov@xxxxxxxxxx> > > Document DT binding for Qualcomm SPMI PMIC voltage ADC > driver. > > Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129 +++++++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-vadc.h | 119 +++++++++++++++++++ > 2 files changed, 248 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h > > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > new file mode 100644 > index 0000000..2253813 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > @@ -0,0 +1,129 @@ > +Qualcomm's SPMI PMIC voltage ADC > + > +SPMI PMIC voltage ADC (VADC) provides interface to clients to read > +voltage. The VADC is a 15-bit sigma-delta ADC. > + > +VADC node: > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: Should contain "qcom,spmi-vadc". > + > +- reg: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: VADC base address and length in the SPMI PMIC register map. > + > +- #address-cells: > + Usage: required > + Value type: <u32> > + Definition: Must be one. Child node 'reg' property should define ADC > + channel number. > + > +- #size-cells: > + Usage: required > + Value type: <u32> > + Definition: Must be zero. > + > +- #io-channel-cells: > + Usage: required > + Value type: <u32> > + Definition: Must be one. For details about IIO bindings see: > + Documentation/devicetree/bindings/iio/iio-bindings.txt > + > +- interrupts: > + Usage: optional > + Value type: <prop-encoded-array> > + Definition: End of conversion interrupt. > + > +Channel node properties: > + > +- reg: > + Usage: required > + Value type: <u32> > + Definition: ADC channel number. > + See include/dt-bindings/iio/qcom,spmi-vadc.h > + > +- qcom,decimation: > + Usage: optional > + Value type: <u32> > + Definition: This parameters is used to decrease ADC sampling rate. Typo: This parameter (singular) > + Quicker measurements can be made by reducing decimation ratio. > + Valid values are 512, 1024, 2048, 4096. > + If property is not found, default value of 512 will be used. > + > +- qcom,pre-scaling: > + Usage: optional > + Value type: <u32 array> > + Definition: Used for scaling the channel input signal before the signal is > + fed to VADC. The configuration for this node is to know the > + pre-determined ratio and use it for post scaling. Select one from > + the following options. > + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> > + If property is not found default value depending of chip will be used. > + > +- qcom,ratiometric: > + Usage: optional > + Value type: <empty> > + Definition: Channel calibration type. If this property is specified > + VADC will use the VDD reference (1.8V) and GND for channel > + calibration. If property is not found, channel will be > + calibrated with 0.625V and 1.25V reference channels, also > + known as absolute calibration. > + > +- qcom,hw-settle-time: > + Usage: optional > + Value type: <u32> > + Definition: Time between AMUX getting configured and the ADC starting > + conversion. Delay = 100us * (value) for value < 11, and > + 2ms * (value - 10) otherwise. > + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, > + 900 us and 1, 2, 4, 6, 8, 10 ms > + If property is not found, channel will use 0us. > + > +- qcom,avg-samples: > + Usage: optional > + Value type: <u32> > + Definition: Number of samples to be used for measurement. > + Averaging provides the option to obtain a single measurement > + from the ADC that is an average of multiple samples. The value > + selected is 2^(value). > + Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 > + If property is not found, 1 sample will be used. > + > +NOTE: > + > +Following channels, also know as reference points channels, are used for Typos: <...> also known as reference point channels <...> > +result calibration and their channel configuration nodes should be defined: > +VADC_REF_625MV and/or VADC_SPARE1, based on PMIC version, VADC_REF_1250MV, Better put the "based on PMIC version" into parenthesis. > +VADC_GND_REF and VADC_VDD_VADC. > + > +Example: > + > + /* VADC node */ > + pmic_vadc: vadc@3100 { > + compatible = "qcom,spmi-vadc"; > + reg = <0x3100 0x100>; > + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + /* Channel node */ > + usb_id_nopull { > + reg = <VADC_LR_MUX10_USB_ID>; > + qcom,decimation = <512>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,avg-samples = <1>; > + qcom,pre-scaling = <1 3>; > + }; > + }; > + > + /* IIO client node */ > + usb { > + io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>; > + io-channel-names = "vadc"; > + }; > diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h > new file mode 100644 > index 0000000..42121fa > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h > @@ -0,0 +1,119 @@ > +/* > + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_H > + > +/* Voltage ADC channels */ > +#define VADC_USBIN 0x00 > +#define VADC_DCIN 0x01 > +#define VADC_VCHG_SNS 0x02 > +#define VADC_SPARE1_03 0x03 > +#define VADC_USB_ID_MV 0x04 > +#define VADC_VCOIN 0x05 > +#define VADC_VBAT_SNS 0x06 > +#define VADC_VSYS 0x07 > +#define VADC_DIE_TEMP 0x08 > +#define VADC_REF_625MV 0x09 > +#define VADC_REF_1250MV 0x0a > +#define VADC_CHG_TEMP 0x0b > +#define VADC_SPARE1 0x0c > +#define VADC_SPARE2 0x0d > +#define VADC_GND_REF 0x0e > +#define VADC_VDD_VADC 0x0f > + > +#define VADC_P_MUX1_1_1 0x10 > +#define VADC_P_MUX2_1_1 0x11 > +#define VADC_P_MUX3_1_1 0x12 > +#define VADC_P_MUX4_1_1 0x13 > +#define VADC_P_MUX5_1_1 0x14 > +#define VADC_P_MUX6_1_1 0x15 > +#define VADC_P_MUX7_1_1 0x16 > +#define VADC_P_MUX8_1_1 0x17 > +#define VADC_P_MUX9_1_1 0x18 > +#define VADC_P_MUX10_1_1 0x19 > +#define VADC_P_MUX11_1_1 0x1a > +#define VADC_P_MUX12_1_1 0x1b > +#define VADC_P_MUX13_1_1 0x1c > +#define VADC_P_MUX14_1_1 0x1d > +#define VADC_P_MUX15_1_1 0x1e > +#define VADC_P_MUX16_1_1 0x1f > + > +#define VADC_P_MUX1_1_3 0x20 > +#define VADC_P_MUX2_1_3 0x21 > +#define VADC_P_MUX3_1_3 0x22 > +#define VADC_P_MUX4_1_3 0x23 > +#define VADC_P_MUX5_1_3 0x24 > +#define VADC_P_MUX6_1_3 0x25 > +#define VADC_P_MUX7_1_3 0x26 > +#define VADC_P_MUX8_1_3 0x27 > +#define VADC_P_MUX9_1_3 0x28 > +#define VADC_P_MUX10_1_3 0x29 > +#define VADC_P_MUX11_1_3 0x2a > +#define VADC_P_MUX12_1_3 0x2b > +#define VADC_P_MUX13_1_3 0x2c > +#define VADC_P_MUX14_1_3 0x2d > +#define VADC_P_MUX15_1_3 0x2e > +#define VADC_P_MUX16_1_3 0x2f > + > +#define VADC_LR_MUX1_BAT_THERM 0x30 > +#define VADC_LR_MUX2_BAT_ID 0x31 > +#define VADC_LR_MUX3_XO_THERM 0x32 > +#define VADC_LR_MUX4_AMUX_THM1 0x33 > +#define VADC_LR_MUX5_AMUX_THM2 0x34 > +#define VADC_LR_MUX6_AMUX_THM3 0x35 > +#define VADC_LR_MUX7_HW_ID 0x36 > +#define VADC_LR_MUX8_AMUX_THM4 0x37 > +#define VADC_LR_MUX9_AMUX_THM5 0x38 > +#define VADC_LR_MUX10_USB_ID 0x39 > +#define VADC_AMUX_PU1 0x3a > +#define VADC_AMUX_PU2 0x3b > +#define VADC_LR_MUX3_BUF_XO_THERM 0x3c > + > +#define VADC_LR_MUX1_PU1_BAT_THERM 0x70 > +#define VADC_LR_MUX2_PU1_BAT_ID 0x71 > +#define VADC_LR_MUX3_PU1_XO_THERM 0x72 > +#define VADC_LR_MUX4_PU1_AMUX_THM1 0x73 > +#define VADC_LR_MUX5_PU1_AMUX_THM2 0x74 > +#define VADC_LR_MUX6_PU1_AMUX_THM3 0x75 > +#define VADC_LR_MUX7_PU1_AMUX_HW_ID 0x76 > +#define VADC_LR_MUX8_PU1_AMUX_THM4 0x77 > +#define VADC_LR_MUX9_PU1_AMUX_THM5 0x78 > +#define VADC_LR_MUX10_PU1_AMUX_USB_ID 0x79 > +#define VADC_LR_MUX3_BUF_PU1_XO_THERM 0x7c > + > +#define VADC_LR_MUX1_PU2_BAT_THERM 0xb0 > +#define VADC_LR_MUX2_PU2_BAT_ID 0xb1 > +#define VADC_LR_MUX3_PU2_XO_THERM 0xb2 > +#define VADC_LR_MUX4_PU2_AMUX_THM1 0xb3 > +#define VADC_LR_MUX5_PU2_AMUX_THM2 0xb4 > +#define VADC_LR_MUX6_PU2_AMUX_THM3 0xb5 > +#define VADC_LR_MUX7_PU2_AMUX_HW_ID 0xb6 > +#define VADC_LR_MUX8_PU2_AMUX_THM4 0xb7 > +#define VADC_LR_MUX9_PU2_AMUX_THM5 0xb8 > +#define VADC_LR_MUX10_PU2_AMUX_USB_ID 0xb9 > +#define VADC_LR_MUX3_BUF_PU2_XO_THERM 0xbc > + > +#define VADC_LR_MUX1_PU1_PU2_BAT_THERM 0xf0 > +#define VADC_LR_MUX2_PU1_PU2_BAT_ID 0xf1 > +#define VADC_LR_MUX3_PU1_PU2_XO_THERM 0xf2 > +#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1 0xf3 > +#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2 0xf4 > +#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3 0xf5 > +#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID 0xf6 > +#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4 0xf7 > +#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5 0xf8 > +#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID 0xf9 > +#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM 0xfc > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */ > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html