Re: [PATCH 2/2] arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

Am Sonntag, 25. Dezember 2022, 12:49:53 CET schrieb Andy Yan:
> There is a AP6398s wifi/bt module on this board.
> Fix the sdmmc1 dt node to make wifi work.
> 
> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
> 
> Signed-off-by: Andy Yan <andyshrk@xxxxxxx>
> ---
> 
>  .../boot/dts/rockchip/rk3566-box-demo.dts     | 26 ++++++++++++++++---
>  1 file changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> index d956496d5221..6c0c24226b52 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> @@ -324,8 +324,12 @@ wifi_enable_h: wifi-enable-h {
>  			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  
> +		wifi_host_wake_h: wifi-host-wake-l {
> +			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
>  		wifi_32k: wifi-32k {
> -			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
> +			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
>  		};
>  	};
>  
> @@ -391,16 +395,30 @@ &sdmmc0 {
>  };
>  
>  &sdmmc1 {
> +	/* WiFi & BT combo module AMPAK AP6398S */
> +	#address-cells = <1>;
> +	#size-cells = <0>;
>  	bus-width = <4>;
> +	clock-frequency = <150000000>;
> +	cap-sdio-irq;
>  	cap-sd-highspeed;
> -	disable-wp;
> +	sd-uhs-sdr104;
> +	keep-power-in-suspend;
>  	mmc-pwrseq = <&sdio_pwrseq>;
>  	non-removable;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
> -	vmmc-supply = <&vcc_3v3>;
> -	vqmmc-supply = <&vcca_1v8>;

why are you removing the mmc-supplies here?
The supplies needed for mmc to work should very much be present
I think, especially to also make sure something else doesn't
turn them off.

Heiko

>  	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		compatible = "brcm,bcm4329-fmac";
> +		reg = <1>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
> +		interrupt-names = "host-wake";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_host_wake_h>;
> +	};
>  };
>  
>  &spdif {
> 







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux