There is a AP6398s wifi/bt module on this board.
Fix the sdmmc1 dt node to make wifi work.
Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
Signed-off-by: Andy Yan <andyshrk@xxxxxxx>
---
.../boot/dts/rockchip/rk3566-box-demo.dts | 26 ++++++++++++++++---
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index d956496d5221..6c0c24226b52 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -324,8 +324,12 @@ wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ wifi_host_wake_h: wifi-host-wake-l {
+ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
wifi_32k: wifi-32k {
- rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
};
};
@@ -391,16 +395,30 @@ &sdmmc0 {
};
&sdmmc1 {
+ /* WiFi & BT combo module AMPAK AP6398S */
+ #address-cells = <1>;
+ #size-cells = <0>;
bus-width = <4>;
+ clock-frequency = <150000000>;
+ cap-sdio-irq;
cap-sd-highspeed;
- disable-wp;
+ sd-uhs-sdr104;
+ keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcca_1v8>;
status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_h>;
+ };
};
&spdif {
--
2.25.1
