Re: [PATCH v4 2/4] arm64: dts: qcom: sm6125: Add UFS nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 22, 2022 at 12:57:09AM -0300, Lux Aliaga wrote:
> On 21/12/2022 04:12, Johan Hovold wrote:
> 
> > On Wed, Dec 21, 2022 at 12:34:46AM -0300, Lux Aliaga wrote:
> >> On 16/12/2022 08:24, Konrad Dybcio wrote:
> >>> On 15.12.2022 20:04, Lux Aliaga wrote:
> >>>> Adds a UFS host controller node and its corresponding PHY to
> >>>> the sm6125 platform.
> >>>> +			reg = <0x04807000 0x1c4>;
> >>>> +
> >>>> +			power-domains = <&gcc UFS_PHY_GDSC>;
> >>>> +
> >>>> +			clock-names = "ref", "ref_aux";
> >>>> +			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> >>>> +
> >>>> +			resets = <&ufs_mem_hc 0>;
> >>>> +			reset-names = "ufsphy";
> >>>> +
> >>>> +			#address-cells = <1>;
> >>>> +			#size-cells = <1>;
> >>>> +			ranges;
> >>>> +
> >>>> +			status = "disabled";
> >>>> +
> >>>> +			ufs_mem_phy_lanes: lanes@4807400 {
> >>>> +				reg = <0x4807400 0x098>,
> >>>> +				      <0x4807600 0x130>,
> >>>> +				      <0x4807c00 0x16c>;
> >>>> +				#phy-cells = <0>;
> >>>> +			};
> >>> I believe this is deprecated. See [1].
> >>> [1] https://lore.kernel.org/linux-arm-msm/20221104092045.17410-1-johan+linaro@xxxxxxxxxx/T/#m988f3fe3d83b76bac247aea2d9dac34f37728d65
> >> I've looked into the documentation and this is only for the sc8280xp.
> >> This PHY is defined as it is for the msm8996 and derivatives.
> > No, it's not just for sc8280xp. It's intended for all new bindings (i.e.
> > do not add more platforms to the msm8996 schema file).

> Alright. But this would mean writing a new config for the sm6125 
> specifically. If we're changing how the bindings for UFS PHYs work, 
> wouldn't it make more sense to change the sm6115 config instead, since 
> they're defined pretty much the same?

It can be done that way too, that is, you can add the missing offsets to
the sm6115 config and use it for both sm6115 and sm6125 if they are
really that closely related. The driver will only parse the old-style
bindings (for sm6115) if the PHY node has a child.

You still need to add a new compatible for sm6125 to the PHY driver,
though, which appears to be missing in this series.

Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux