Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26/12/2022 18:56, Laurent Pinchart wrote:
Hi Tomi,

On Wed, Dec 14, 2022 at 08:36:47AM +0200, Tomi Valkeinen wrote:
On 14/12/2022 08:29, Tomi Valkeinen wrote:

wondering if the struct device of the DS90UB913 could be passed instead
of the port, to avoid passing the port throught
ds90ub9xx_platform_data.

Interesting thought. That would limit the number of remote i2c busses to
one, though. Not a problem for FPD-Link, but I wonder if that's assuming
too much for the future users. Then again, this is an in-kernel API so
we could extend it later if needed. So I'll try this out and see if I
hit any issues.

Right, so the issue with this one would be that it would prevent a
single device uses. E.g. a single chip which acts as an ATR (similar to
i2c-mux chips), i.e. it contains both the main and the remote i2c busses.

I don't think I understand this, sorry.

What you are suggesting above means that we'd have a separate device for each port of the ATR. Which is fine in our current case, as the i2c master busses are behind separate remote devices.

But if you consider a case similar to i2c-mux, where we have a single chip with the slave bus and, say, 4 master busses. We would probably have only a single device for that.

 Tomi




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux