On Tue, Dec 20, 2022 at 09:12:47AM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@xxxxxxxx>
>
> Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> which has version A and version B. Support booting and basic
> clock/reset/pinctrl/uart drivers.
>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Co-developed-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Co-developed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> ---
> arch/riscv/boot/dts/starfive/Makefile | 1 +
> .../jh7110-starfive-visionfive-2-va.dts | 13 ++
> .../jh7110-starfive-visionfive-2-vb.dts | 13 ++
> .../jh7110-starfive-visionfive-2.dtsi | 111 ++++++++++++++++++
> 4 files changed, 138 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-va.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-vb.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 0ea1bc15ab30..79e925a4a227 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb jh7110-starfive-visionfive-2-vb.dtb
Could you rebase on top of v6.2-rc1 when you submit your next version
squash this in please (unless Emil hates it):
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index c38a9ade7f48..b3744420253a 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
-dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb jh7110-starfive-visionfive-2-vb.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-vb.dtb
I'd rather have more, but easier to read lines than long ones.
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> new file mode 100644
> index 000000000000..c60280b89c73
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include "jh7110.dtsi"
> +#include "jh7110-pinfunc.h"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + cpus {
> + timebase-frequency = <4000000>;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x1 0x0>;
Is this a good idea when you have SKUs with 2, 4 & 8 GiB of DDR?
Anyways, I can't review this as I've got neither board nor
documentation, so with the above stuff sorted out:
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
I'll not apply it until the clock binding header is in my tree.
Thanks,
Conor.
Attachment:
signature.asc
Description: PGP signature
