Hi, Durai,
On 13.12.2022 14:06, Durai Manickam KR wrote:
> From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
>
> Fixed the label numbering of the flexcom functions so that all
> 13 flexcom functions of sam9x60 are in the following order when the missing
> flexcom functions are added:
>
> flx0: uart0, spi0, i2c0
> flx1: uart1, spi1, i2c1
> flx2: uart2, spi2, i2c2
> flx3: uart3, spi3, i2c3
> flx4: uart4, spi4, i2c4
> flx5: uart5, spi5, i2c5
> flx6: uart6, i2c6
> flx7: uart7, i2c7
> flx8: uart8, i2c8
> flx9: uart9, i2c9
> flx10: uart10, i2c10
> flx11: uart11, i2c11
> flx12: uart12, i2c12
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
You SoB should go here.
> ---
> arch/arm/boot/dts/at91-sam9x60ek.dts | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index d929c1ba5789..cf5d786531f2 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -16,8 +16,8 @@ / {
>
> aliases {
> i2c0 = &i2c0;
> - i2c1 = &i2c1;
> - serial1 = &uart1;
> + i2c1 = &i2c6;
> + serial1 = &uart5;
> };
>
> chosen {
> @@ -234,7 +234,7 @@ &flx4 {
> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
> status = "disabled";
>
> - spi0: spi@400 {
> + spi4: spi@400 {
> compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> reg = <0x400 0x200>;
> interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> @@ -253,7 +253,7 @@ &flx5 {
> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
> status = "okay";
>
> - uart1: serial@200 {
> + uart5: serial@200 {
> compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> @@ -279,7 +279,7 @@ &flx6 {
> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> status = "okay";
>
> - i2c1: i2c@600 {
> + i2c6: i2c@600 {
> compatible = "microchip,sam9x60-i2c";
> reg = <0x600 0x200>;
> interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> @@ -439,7 +439,7 @@ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
> AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> };
>
> - pinctrl_flx5_default: flx_uart {
> + pinctrl_flx5_default: flx5_uart {
> atmel,pins =
> <AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
> AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
