On Fri, 16 Dec 2022 at 03:02, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote: > > > > On 2022/12/7 21:17, William Qiu wrote: > > Hi, > > > > This patchset adds initial rudimentary support for the StarFive > > designware mobile storage host controller driver. And this driver will > > be used in StarFive's visionfive-v2 board. The main purpose of adding > > this driver is to accommodate the ultra-high speed mode of eMMC. > > > > The patch series is based on v6.1-rc5. > > > > -- William > > > > William Qiu (3): > > dt-bindings: mmc: Add bindings for StarFive > > mmc: starfive: Add sdio/emmc driver support > > riscv: dts: starfive: Add mmc node > > > > .../bindings/mmc/starfive,jh7110-sdio.yaml | 71 +++++++ > > MAINTAINERS | 6 + > > .../jh7110-starfive-visionfive-v2.dts | 25 +++ > > arch/riscv/boot/dts/starfive/jh7110.dtsi | 38 ++++ > > drivers/mmc/host/Kconfig | 10 + > > drivers/mmc/host/Makefile | 1 + > > drivers/mmc/host/dw_mmc-starfive.c | 197 ++++++++++++++++++ > > 7 files changed, 348 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.yaml > > create mode 100644 drivers/mmc/host/dw_mmc-starfive.c > > > > -- > > 2.34.1 > > > > Hi Jaehoon/Ulf, > > Could you please help to review and provide comments on this patch series? > Thank you in advance. Hi William, Looks like you have received plenty of good comments already and there are a lot of things for you to update. That said, I think it makes better sense for me to look at the next version instead. > > Best regards, > William Qiu Kind regards Uffe
