[PATCH v2 9/9] riscv: dts: starfive: visionfive-v2: Add phy clock delay train configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In view of the particularity of StarFive JH7110 SoC, the PHY clock delay
train configuration parameters must be adjusted for StarFive VisionFive
v2 board.

Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
---
 .../jh7110-starfive-visionfive-v2.dts         | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
index c8946cf3a268..81329d67ef0f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
@@ -15,6 +15,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
@@ -114,3 +116,29 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&gmac0 {
+	status = "okay";
+};
+
+&phy0 {
+	rxc_dly_en = <1>;
+	tx_delay_sel_fe = <5>;
+	tx_delay_sel = <0xa>;
+	tx_inverted_10 = <0x1>;
+	tx_inverted_100 = <0x1>;
+	tx_inverted_1000 = <0x1>;
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&phy1 {
+	rxc_dly_en = <0>;
+	tx_delay_sel_fe = <5>;
+	tx_delay_sel = <0>;
+	tx_inverted_10 = <0x1>;
+	tx_inverted_100 = <0x1>;
+	tx_inverted_1000 = <0x0>;
+};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux