From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> This RTC is very similar in functionality to the PCF2127/29. Basically it: -supports two new control registers at offsets 4 and 5 -supports a new reset register (not implemented in this driver) -supports 4 tamper detection functions instead of 1 -has no nvmem (like the PCF2129) -has two output interrupt pins Because of that, most of the register addresses are very different, although they still follow the same layout. For example, the tamper registers have a different base address, but the offsets are all the same. Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> --- drivers/rtc/Kconfig | 4 +- drivers/rtc/rtc-pcf2127.c | 234 ++++++++++++++++++++++++++++++++++---- 2 files changed, 215 insertions(+), 23 deletions(-) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 2bb640d1521d..3d4043ce0057 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -910,9 +910,9 @@ config RTC_DRV_PCF2127 select REGMAP_SPI if SPI_MASTER select WATCHDOG_CORE if WATCHDOG help - If you say yes here you get support for the NXP PCF2127/29 RTC + If you say yes here you get support for the NXP PCF2127/29/31 RTC chips with integrated quartz crystal for industrial applications. - Both chips also have watchdog timer and tamper switch detection + These chips also have watchdog timer and tamper switch detection features. PCF2127 has an additional feature of 512 bytes battery backed diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 3265878edc48..4148e135f935 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -1,16 +1,26 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * An I2C and SPI driver for the NXP PCF2127/29 RTC + * An I2C and SPI driver for the NXP PCF2127/29/31 RTC * Copyright 2013 Til-Technologies + * Copyright 2021 DimOnOff * * Author: Renaud Cerrato <r.cerrato@xxxxxxxxxxxxxxxxxxx> * * Watchdog and tamper functions * Author: Bruno Thomsen <bruno.thomsen@xxxxxxxxx> * + * PCF2131 support + * Author: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> + * * based on the other drivers in this same directory. * - * Datasheet: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf + * Datasheets: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf + * https://www.nxp.com/docs/en/data-sheet/PCF2131DS.pdf + */ + +/* + * The following features are not yet implemented for the PCF2131: + * - support for 1/100th seconds */ #include <linux/i2c.h> @@ -43,8 +53,30 @@ #define PCF2127_BIT_CTRL3_BLF BIT(2) #define PCF2127_BIT_CTRL3_BF BIT(3) #define PCF2127_BIT_CTRL3_BTSE BIT(4) +/* Control register 4 */ +#define PCF2131_REG_CTRL4 0x03 +#define PCF2131_BIT_CTRL4_TSF4 BIT(4) +#define PCF2131_BIT_CTRL4_TSF3 BIT(5) +#define PCF2131_BIT_CTRL4_TSF2 BIT(6) +#define PCF2131_BIT_CTRL4_TSF1 BIT(7) +/* Control register 5 */ +#define PCF2131_REG_CTRL5 0x04 +#define PCF2131_BIT_CTRL5_TSIE4 BIT(4) +#define PCF2131_BIT_CTRL5_TSIE3 BIT(5) +#define PCF2131_BIT_CTRL5_TSIE2 BIT(6) +#define PCF2131_BIT_CTRL5_TSIE1 BIT(7) +/* Software reset register */ +#define PCF2131_REG_SR_RESET 0x05 +#define PCF2131_SR_RESET_READ_PATTERN 0b00100100 /* Fixed pattern. */ +#define PCF2131_SR_RESET_RESET_CMD 0x2C /* SR is bit 3. */ /* Time and date registers */ #define PCF2127_REG_TIME_DATE_BASE 0x03 +#define PCF2131_REG_TIME_DATE_BASE 0x07 /* Register 0x06 is 100th seconds, + * but we do not support it. By + * using offset 0x07, we can be + * compatible with existing + * time/date functions. + */ /* Time and date registers offsets (starting from base register) */ #define PCF2127_OFFSET_TD_SC 0 #define PCF2127_OFFSET_TD_MN 1 @@ -57,6 +89,7 @@ #define PCF2127_BIT_SC_OSF BIT(7) /* Alarm registers */ #define PCF2127_REG_ALARM_BASE 0x0A +#define PCF2131_REG_ALARM_BASE 0x0E /* Alarm registers offsets (starting from base register) */ #define PCF2127_OFFSET_ALARM_SC 0 #define PCF2127_OFFSET_ALARM_MN 1 @@ -67,16 +100,26 @@ #define PCF2127_BIT_ALARM_AE BIT(7) /* CLKOUT control register */ #define PCF2127_REG_CLKOUT 0x0f +#define PCF2131_REG_CLKOUT 0x13 #define PCF2127_BIT_CLKOUT_OTPR BIT(5) /* Watchdog registers */ #define PCF2127_REG_WD_CTL 0x10 +#define PCF2131_REG_WD_CTL 0x35 #define PCF2127_BIT_WD_CTL_TF0 BIT(0) #define PCF2127_BIT_WD_CTL_TF1 BIT(1) #define PCF2127_BIT_WD_CTL_CD0 BIT(6) #define PCF2127_BIT_WD_CTL_CD1 BIT(7) #define PCF2127_REG_WD_VAL 0x11 +#define PCF2131_REG_WD_VAL 0x36 /* Tamper timestamp1 registers */ #define PCF2127_REG_TS1_BASE 0x12 +#define PCF2131_REG_TS1_BASE 0x14 +/* Tamper timestamp2 registers */ +#define PCF2131_REG_TS2_BASE 0x1B +/* Tamper timestamp3 registers */ +#define PCF2131_REG_TS3_BASE 0x22 +/* Tamper timestamp4 registers */ +#define PCF2131_REG_TS4_BASE 0x29 /* Tamper timestamp registers common offsets (starting from base register) */ #define PCF2127_OFFSET_TS_CTL 0 #define PCF2127_OFFSET_TS_SC 1 @@ -92,11 +135,22 @@ * RAM registers * PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is * battery backed and can survive a power outage. - * PCF2129 doesn't have this feature. + * PCF2129/31 doesn't have this feature. */ #define PCF2127_REG_RAM_ADDR_MSB 0x1A #define PCF2127_REG_RAM_WRT_CMD 0x1C #define PCF2127_REG_RAM_RD_CMD 0x1D +/* Interrupt mask registers */ +#define PCF2131_REG_INT_A_MASK1 0x31 +#define PCF2131_REG_INT_A_MASK2 0x32 +#define PCF2131_REG_INT_B_MASK1 0x33 +#define PCF2131_REG_INT_B_MASK2 0x34 +#define PCF2131_BIT_INT_BLIE BIT(0) +#define PCF2131_BIT_INT_BIE BIT(1) +#define PCF2131_BIT_INT_AIE BIT(2) +#define PCF2131_BIT_INT_WD_CD BIT(3) +#define PCF2131_BIT_INT_SI BIT(4) +#define PCF2131_BIT_INT_MI BIT(5) /* Watchdog timer value constants */ #define PCF2127_WD_VAL_STOP 0 @@ -110,6 +164,14 @@ PCF2127_BIT_CTRL2_AF | \ PCF2127_BIT_CTRL2_WDTF | \ PCF2127_BIT_CTRL2_TSF2) +#define PCF2131_CTRL2_IRQ_MASK ( \ + PCF2127_BIT_CTRL2_AF | \ + PCF2127_BIT_CTRL2_WDTF) +#define PCF2131_CTRL4_IRQ_MASK ( \ + PCF2131_BIT_CTRL4_TSF4 | \ + PCF2131_BIT_CTRL4_TSF3 | \ + PCF2131_BIT_CTRL4_TSF2 | \ + PCF2131_BIT_CTRL4_TSF1) struct pcf21xx_ts_config { u8 regs_base; /* Base register to read timestamp values. */ @@ -370,7 +432,7 @@ static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd, } static const struct watchdog_info pcf2127_wdt_info = { - .identity = "NXP PCF2127/PCF2129 Watchdog", + .identity = "NXP PCF2127/29/31 Watchdog", .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, }; @@ -555,30 +617,64 @@ static void pcf2127_rtc_ts_snapshot(struct device *dev, int ts_id) static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev); - unsigned int ctrl1, ctrl2; + unsigned int ctrl2; int ret = 0; - ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); - if (ret) - return IRQ_NONE; - ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); if (ret) return IRQ_NONE; - if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK)) - return IRQ_NONE; + if (pcf2127->cfg->ts_count == 1) { + /* PCF2127/29 */ + unsigned int ctrl1; + + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); + if (ret) + return IRQ_NONE; + + if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK)) + return IRQ_NONE; - if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2) - pcf2127_rtc_ts_snapshot(dev, 0); + if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2) + pcf2127_rtc_ts_snapshot(dev, 0); - if (ctrl1 & PCF2127_CTRL1_IRQ_MASK) - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1, - ctrl1 & ~PCF2127_CTRL1_IRQ_MASK); + if (ctrl1 & PCF2127_CTRL1_IRQ_MASK) + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1, + ctrl1 & ~PCF2127_CTRL1_IRQ_MASK); + + if (ctrl2 & PCF2127_CTRL2_IRQ_MASK) + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, + ctrl2 & ~PCF2127_CTRL2_IRQ_MASK); + } else { + /* PCF2131. */ + unsigned int ctrl4; + + ret = regmap_read(pcf2127->regmap, PCF2131_REG_CTRL4, &ctrl4); + if (ret) + return IRQ_NONE; - if (ctrl2 & PCF2127_CTRL2_IRQ_MASK) - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, - ctrl2 & ~PCF2127_CTRL2_IRQ_MASK); + if (!(ctrl4 & PCF2131_CTRL4_IRQ_MASK || ctrl2 & PCF2131_CTRL2_IRQ_MASK)) + return IRQ_NONE; + + if (ctrl4 & PCF2131_CTRL4_IRQ_MASK) { + int i; + int tsf_bit = PCF2131_BIT_CTRL4_TSF1; /* Start at bit 7. */ + + for (i = 0; i < pcf2127->cfg->ts_count; i++) { + if (ctrl4 & tsf_bit) + pcf2127_rtc_ts_snapshot(dev, i); + + tsf_bit = tsf_bit >> 1; + } + + regmap_write(pcf2127->regmap, PCF2131_REG_CTRL4, + ctrl4 & ~PCF2131_CTRL4_IRQ_MASK); + } + + if (ctrl2 & PCF2131_CTRL2_IRQ_MASK) + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, + ctrl2 & ~PCF2131_CTRL2_IRQ_MASK); + } if (ctrl2 & PCF2127_BIT_CTRL2_AF) rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF); @@ -650,6 +746,27 @@ static ssize_t timestamp0_store(struct device *dev, return timestamp_store(dev, attr, buf, count, 0); }; +static ssize_t timestamp1_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return timestamp_store(dev, attr, buf, count, 1); +}; + +static ssize_t timestamp2_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return timestamp_store(dev, attr, buf, count, 2); +}; + +static ssize_t timestamp3_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return timestamp_store(dev, attr, buf, count, 3); +}; + static ssize_t timestamp_show(struct device *dev, struct device_attribute *attr, char *buf, int ts_id) @@ -714,16 +831,46 @@ static ssize_t timestamp0_show(struct device *dev, return timestamp_show(dev, attr, buf, 0); }; +static ssize_t timestamp1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return timestamp_show(dev, attr, buf, 1); +}; + +static ssize_t timestamp2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return timestamp_show(dev, attr, buf, 2); +}; + +static ssize_t timestamp3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return timestamp_show(dev, attr, buf, 3); +}; + static DEVICE_ATTR_RW(timestamp0); +static DEVICE_ATTR_RW(timestamp1); +static DEVICE_ATTR_RW(timestamp2); +static DEVICE_ATTR_RW(timestamp3); static struct attribute *pcf2127_attrs[] = { &dev_attr_timestamp0.attr, NULL }; +static struct attribute *pcf2131_attrs[] = { + &dev_attr_timestamp0.attr, + &dev_attr_timestamp1.attr, + &dev_attr_timestamp2.attr, + &dev_attr_timestamp3.attr, + NULL +}; + enum pcf21xx_type { PCF2127, PCF2129, + PCF2131, PCF21XX_LAST_ID }; @@ -774,6 +921,48 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .attrs = pcf2127_attrs, }, }, + [PCF2131] = { + .max_register = 0x36, + .has_nvmem = 0, + .has_bit_wd_ctl_cd0 = 0, + .regs_td_base = PCF2131_REG_TIME_DATE_BASE, + .regs_alarm_base = PCF2131_REG_ALARM_BASE, + .reg_wd_ctl = PCF2131_REG_WD_CTL, + .reg_wd_val = PCF2131_REG_WD_VAL, + .reg_clkout = PCF2131_REG_CLKOUT, + .ts_count = 4, + .ts[0] = { + .regs_base = PCF2131_REG_TS1_BASE, + .low_reg = PCF2131_REG_CTRL4, + .low_bit = PCF2131_BIT_CTRL4_TSF1, + .ie_reg = PCF2131_REG_CTRL5, + .ie_bit = PCF2131_BIT_CTRL5_TSIE1, + }, + .ts[1] = { + .regs_base = PCF2131_REG_TS2_BASE, + .low_reg = PCF2131_REG_CTRL4, + .low_bit = PCF2131_BIT_CTRL4_TSF2, + .ie_reg = PCF2131_REG_CTRL5, + .ie_bit = PCF2131_BIT_CTRL5_TSIE2, + }, + .ts[2] = { + .regs_base = PCF2131_REG_TS3_BASE, + .low_reg = PCF2131_REG_CTRL4, + .low_bit = PCF2131_BIT_CTRL4_TSF3, + .ie_reg = PCF2131_REG_CTRL5, + .ie_bit = PCF2131_BIT_CTRL5_TSIE3, + }, + .ts[3] = { + .regs_base = PCF2131_REG_TS4_BASE, + .low_reg = PCF2131_REG_CTRL4, + .low_bit = PCF2131_BIT_CTRL4_TSF4, + .ie_reg = PCF2131_REG_CTRL5, + .ie_bit = PCF2131_BIT_CTRL5_TSIE4, + }, + .attribute_group = { + .attrs = pcf2131_attrs, + }, + }, }; /* @@ -922,7 +1111,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, * Watchdog timer enabled and reset pin /RST activated when timed out. * Select 1Hz clock source for watchdog timer. * Note: Countdown timer disabled and not available. - * For pca2129, pcf2129, only bit[7] is for Symbol WD_CD + * For pca2129, pcf2129 and pcf2131, only bit[7] is for Symbol WD_CD * of register watchdg_tim_ctl. The bit[6] is labeled * as T. Bits labeled as T must always be written with * logic 0. @@ -982,6 +1171,7 @@ static const struct of_device_id pcf2127_of_match[] = { { .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] }, { .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] }, { .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] }, + { .compatible = "nxp,pcf2131", .data = &pcf21xx_cfg[PCF2131] }, {} }; MODULE_DEVICE_TABLE(of, pcf2127_of_match); @@ -1069,6 +1259,7 @@ static const struct i2c_device_id pcf2127_i2c_id[] = { { "pcf2127", PCF2127 }, { "pcf2129", PCF2129 }, { "pca2129", PCF2129 }, + { "pcf2131", PCF2131 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id); @@ -1190,6 +1381,7 @@ static const struct spi_device_id pcf2127_spi_id[] = { { "pcf2127", PCF2127 }, { "pcf2129", PCF2129 }, { "pca2129", PCF2129 }, + { "pcf2131", PCF2131 }, { } }; MODULE_DEVICE_TABLE(spi, pcf2127_spi_id); @@ -1254,5 +1446,5 @@ static void __exit pcf2127_exit(void) module_exit(pcf2127_exit) MODULE_AUTHOR("Renaud Cerrato <r.cerrato@xxxxxxxxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver"); +MODULE_DESCRIPTION("NXP PCF2127/29/31 RTC driver"); MODULE_LICENSE("GPL v2"); -- 2.30.2
