On Wed, Dec 14, 2022 at 01:24:03PM +0000, Emekcan Aras wrote: > From: Emekcan Aras <Emekcan.Aras@xxxxxxx> > > Corstone500[0] is a platform from arm, which includes Cortex-A cores and > ideal starting point for feature rich System on Chip (SoC) designs > based on the Cortex-A5 core. > > These device trees contains the necessary bits to support the > Corstone 500 FVP (Fixed Virtual Platform) and the > FPGA MPS3 board. > > 0: https://developer.arm.com/documentation/102262/0000 > > Signed-off-by: Emekcan Aras <emekcan.aras@xxxxxxx> > --- > arch/arm/boot/dts/corstone500.dts | 181 ++++++++++++++++++++++++++++++ > 1 file changed, 181 insertions(+) > create mode 100644 arch/arm/boot/dts/corstone500.dts > > diff --git a/arch/arm/boot/dts/corstone500.dts b/arch/arm/boot/dts/corstone500.dts > new file mode 100644 > index 000000000000..976aa333ffbc > --- /dev/null > +++ b/arch/arm/boot/dts/corstone500.dts > @@ -0,0 +1,181 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +/* > + * Copyright (c) 2022, Arm Limited. All rights reserved. > + * > + */ > + > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + model = "ARM Corstone500"; > + compatible = "arm,corstone500"; > + interrupt-parent = <&gic>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + psci { > + compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; You really need to be compatible with all these PSCI versions? 'arm,psci' means you have the function IDs in DT before they were standardized (in 2013 IIRC). You need to support OS's from that time? > + method = "smc"; > + cpu_on = <0x84000003>; And here is one, but the rest? Really, it should be dropped along with 'arm,psci'. > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + enable-method = "psci"; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a5"; > + reg = <0>; > + next-level-cache = <&L2>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a5"; > + reg = <1>; > + next-level-cache = <&L2>; > + }; > + > + cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a5"; > + reg = <2>; > + next-level-cache = <&L2>; > + }; > + > + cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a5"; > + reg = <3>; > + next-level-cache = <&L2>; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x7f000000>; > + }; > + > + L2: cache-controller@1c010000 { > + compatible = "arm,pl310-cache"; > + reg = <0x1c010000 0x1000>; > + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; > + cache-level = <2>; > + cache-unified; > + arm,data-latency = <1 1 1>; > + arm,tag-latency = <1 1 1>; > + }; > + > + refclk7500khz: refclk7500khz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <7500000>; > + clock-output-names = "apb_pclk"; > + }; > + > + refclk24mhz: refclk24mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + clock-output-names = "apb_pclk"; > + }; > + > + smbclk: refclk24mhzx2 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <48000000>; > + clock-output-names = "smclk"; > + }; > + > + rtc@1a220000 { Why is this one not under 'soc'. Really, all MMIO nodes should be. > + compatible = "arm,pl031", "arm,primecell"; > + reg = <0x1a220000 0x1000>; > + clocks = <&refclk24mhz>; > + interrupts = <GIC_SPI 6 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + clock-names = "apb_pclk"; > + }; > + > + gic: interrupt-controller@1c001000 { > + compatible = "arm,cortex-a5-gic"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + reg = <0x1c001000 0x1000>, > + <0x1c000100 0x100>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + soc{ > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + clock_frequency = <50000000>; > + interrupt-parent = <&gic>; > + ranges; > + > + uart0: serial@1a200000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x1a200000 0x1000>; > + interrupts = <GIC_SPI 8 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + clocks = <&refclk7500khz>; > + clock-names = "apb_pclk"; > + }; > + > + uart1: serial@1a210000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x1a210000 0x1000>; > + interrupts = <GIC_SPI 9 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + clocks = <&refclk7500khz>; > + clock-names = "apb_pclk"; > + }; > + > + timer0: timer@1a040000 { > + compatible = "arm,armv7-timer-mem"; > + reg = <0x1a040000 0x1000>; > + clock-frequency = <7500000>; > + > + frame@1a050000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 2 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + reg = <0x1a050000 0x1000>; > + }; > + }; > + > + smsc: ethernet@4020000 { > + compatible = "smsc,lan9220", "smsc,lan9115"; > + reg = <0x40200000 0x10000>; > + interrupts = <GIC_SPI 43 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; > + reg-io-width = <4>; > + phy-mode = "mii"; > + smsc,irq-active-high; > + vdd33a-supply = <&v2m_fixed_3v3>; > + vddvario-supply = <&v2m_fixed_3v3>; > + }; > + }; > + > + v2m_fixed_3v3: fixed-regulator-0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > +}; > -- > 2.25.1 > >
