Hi Marcel, Thank you for your humble patch ;-) On Wed, Dec 14, 2022 at 07:13:54AM +0100, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > Add PCIe support on the Verdin iMX8M Plus. > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > This has successfully been tested with Lucas' imx8mp-hsio-blk-ctrl high > performance PLL clock exposure patch set [1] a later version thereof > hopefully may land together with my humble patch. Thanks! > > [1] https://lore.kernel.org/all/20221213160112.1900410-1-l.stach@xxxxxxxxxxxxxx/ > > .../dts/freescale/imx8mp-verdin-dahlia.dtsi | 9 +++++++- > .../boot/dts/freescale/imx8mp-verdin.dtsi | 22 ++++++++++++++++++- > 2 files changed, 29 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi > index 80db1ad7c230..56b0e4b865c9 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi > @@ -67,7 +67,14 @@ &i2c4 { > /* TODO: Audio Codec */ > }; > > -/* TODO: Verdin PCIE_1 */ > +/* Verdin PCIE_1 */ > +&pcie { > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > > /* Verdin PWM_1 */ > &pwm1 { > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi > index 6a1890a4b5d8..f3a46f4caf49 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi > @@ -749,7 +749,27 @@ eeprom_carrier_board: eeprom@57 { > }; > }; > > -/* TODO: Verdin PCIE_1 */ > +/* Verdin PCIE_1 */ > +&pcie { > + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; > + assigned-clock-rates = <10000000>; > + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, > + <&clk IMX8MP_CLK_PCIE_ROOT>, > + <&clk IMX8MP_CLK_HSIO_AXI>; > + clock-names = "pcie", "pcie_aux", "pcie_bus"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + /* PCIE_1_RESET# (SODIMM 244) */ > + reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; > +}; > + > +&pcie_phy { > + clocks = <&hsio_blk_ctrl>; > + clock-names = "ref"; > + fsl,clkreq-unsupported; > + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; > +}; > > /* Verdin PWM_1 */ > &pwm1 { -- Regards, Laurent Pinchart
