Re: [PATCH v3 10/12] dt-bindings: mediatek: mt8188: add audio afe document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/12/2022 11:56, Trevor Wu (吳文良) wrote:
>>> +
>>> +patternProperties:
>>> +  "^mediatek,etdm-in[1-2]-chn-disabled$":
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    minItems: 1
>>> +    maxItems: 16
>>> +    description:
>>> +      By default, all data received from ETDM pins will be
>>> outputed to
>>> +      memory. etdm in supports disable_out in direct mode(w/o
>>> interconn).
>>> +      User can specify the channel ID which they hope dropping and
>>> then
>>> +      the specified channel won't be seen on memory.
>>
>> So we know what are the IDs but it's a mystery what are the values.
>> Especially with unique values - how any of these should case that
>> channel "won't be seen in memory"?
>>
> For example,
> FE can support 14ch, but BE(etdm) can't support 14ch(it can support
> 16ch).
> In the case, we can configure 16ch to etdm and make use of the property
> to disable the last two channels.
> 
> mediatek,etdm-in1-chn-disabled = /bits/ 8 <0xE 0xF>;

Your description should explain that this is a list of channel IDs which
should be disabled.

> 
> 
>>> +    uniqueItems: true
>>> +    items:
>>> +      minimum: 0
>>> +      maximum: 15
>>> +
>>> +  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
>>> +    description: Specify etdm in mclk output rate for always on
>>> case.
>>
>> How is it different than assigned-clock-rates?
>>
> This includes clock enabling at init stage.

assigned-clock-rates are also at init stage. I asked what is different.

> 
>>> +
>>> +  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
>>> +    description: Specify etdm out mclk output rate for always on
>>> case.
>>> +
>>> +  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
>>> +    type: boolean
>>> +    description: if present, the etdm data mode is I2S.
>>> +
>>> +  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
>>> +    type: boolean
>>> +    description: if present, the etdm data mode is I2S.
>>> +
>>> +  "^mediatek,etdm-in[1-2]-cowork-source$":
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description:
>>> +      etdm modules can share the same external clock pin. Specify
>>> +      which etdm clock source is required by this etdm in moudule.
>>
>> typo: module
>>

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux