Re: [PATCH net-next v1 3/4] dt-bindings: net: phy: add MaxLinear GPY2xx bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2022-12-05 22:29, schrieb Rob Herring:
On Fri, Dec 02, 2022 at 04:12:03PM +0100, Michael Walle wrote:
Add the device tree bindings for the MaxLinear GPY2xx PHYs.

Signed-off-by: Michael Walle <michael@xxxxxxxx>
---

Is the filename ok? I was unsure because that flag is only for the GPY215 for now. But it might also apply to others. Also there is no compatible
string, so..

.../bindings/net/maxlinear,gpy2xx.yaml | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml

diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
new file mode 100644
index 000000000000..d71fa9de2b64
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/maxlinear,gpy2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MaxLinear GPY2xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@xxxxxxx>
+  - Michael Walle <michael@xxxxxxxx>
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  maxlinear,use-broken-interrupts:
+    description: |
+      Interrupts are broken on some GPY2xx PHYs in that they keep the
+ interrupt line asserted even after the interrupt status register is + cleared. Thus it is blocking the interrupt line which is usually bad + for shared lines. By default interrupts are disabled for this PHY and + polling mode is used. If one can live with the consequences, this
+      property can be used to enable interrupt handling.

Just omit the interrupt property if you don't want interrupts and add it
if you do.

How does that work together with "the device tree describes
the hardware and not the configuration". The interrupt line
is there, its just broken sometimes and thus it's disabled
by default for these PHY revisions/firmwares. With this
flag the user can say, "hey on this hardware it is not
relevant because we don't have shared interrupts or because
I know what I'm doing".

+
+      Affected PHYs (as far as known) are GPY215B and GPY215C.
+    type: boolean
+
+dependencies:
+  maxlinear,use-broken-interrupts: [ interrupts ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+            interrupts-extended = <&intc 0>;
+            maxlinear,use-broken-interrupts;

This is never actually checked by be schema because there is nothing to
match on. If you want custom properties, then you need a compatible.

This seems to be a problem for any phy bindings then.

-michael



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux