[PATCH v2 7/8] mmc: sdhci-pxav2: add optional pinctrl for SDIO IRQ workaround

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PXA168 errata recommends that the CMD signal should be detached from
the SD bus while performing the dummy CMD0 to restart the clock.
Implement this using pinctrl states.

Signed-off-by: Doug Brown <doug@xxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-pxav2.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 912b2aad9f2e..88927549b425 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -22,6 +22,7 @@
 #include <linux/of_device.h>
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/mmc.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
@@ -46,6 +47,9 @@
 struct sdhci_pxav2_host {
 	struct clk *clk_core;
 	struct mmc_request *sdio_mrq;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_default;
+	struct pinctrl_state *pins_cmd_gpio;
 };
 
 static void pxav2_reset(struct sdhci_host *host, u8 mask)
@@ -104,6 +108,11 @@ static u32 pxav1_irq(struct sdhci_host *host, u32 intmask)
 		/* The dummy CMD0 for the SDIO workaround just completed */
 		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, SDHCI_INT_STATUS);
 		intmask &= ~SDHCI_INT_CMD_MASK;
+
+		/* Restore MMC function to CMD pin */
+		if (pxav2_host->pinctrl && pxav2_host->pins_default)
+			pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_default);
+
 		mmc_request_done(host->mmc, pxav2_host->sdio_mrq);
 		pxav2_host->sdio_mrq = NULL;
 	}
@@ -128,6 +137,11 @@ static void pxav1_request_done(struct sdhci_host *host, struct mmc_request *mrq)
 		/* Clock is now stopped, so restart it by sending a dummy CMD0 */
 		pxav2_host = sdhci_pltfm_priv(sdhci_priv(host));
 		pxav2_host->sdio_mrq = mrq;
+
+		/* Set CMD as high output rather than MMC function while we do CMD0 */
+		if (pxav2_host->pinctrl && pxav2_host->pins_cmd_gpio)
+			pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_cmd_gpio);
+
 		sdhci_writel(host, 0, SDHCI_ARGUMENT);
 		sdhci_writew(host, 0, SDHCI_TRANSFER_MODE);
 		sdhci_writew(host, SDHCI_MAKE_CMD(MMC_GO_IDLE_STATE, SDHCI_CMD_RESP_NONE),
@@ -298,6 +312,21 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
 	if (match && of_device_is_compatible(dev->of_node, "mrvl,pxav1-mmc")) {
 		host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ | SDHCI_QUIRK_32BIT_DMA_SIZE;
 		host->ops = &pxav1_sdhci_ops;
+
+		/* Set up optional pinctrl for PXA168 SDIO IRQ fix */
+		pxav2_host->pinctrl = devm_pinctrl_get(&pdev->dev);
+		if (!IS_ERR(pxav2_host->pinctrl)) {
+			pxav2_host->pins_cmd_gpio = pinctrl_lookup_state(pxav2_host->pinctrl,
+									 "state_cmd_gpio");
+			if (IS_ERR(pxav2_host->pins_cmd_gpio))
+				pxav2_host->pins_cmd_gpio = NULL;
+			pxav2_host->pins_default = pinctrl_lookup_state(pxav2_host->pinctrl,
+									"default");
+			if (IS_ERR(pxav2_host->pins_default))
+				pxav2_host->pins_default = NULL;
+		} else {
+			pxav2_host->pinctrl = NULL;
+		}
 	} else {
 		host->ops = &pxav2_sdhci_ops;
 	}
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux