[PATCH v2 6/8] mmc: sdhci-pxav2: add SDIO card IRQ workaround for PXA168 V1 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PXA168 has a documented silicon bug that causes SDIO card IRQs to be
missed. Implement the first half of the suggested workaround, which
involves resetting the data port logic and issuing a dummy CMD0 to
restart the clock.

Signed-off-by: Doug Brown <doug@xxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-pxav2.c | 49 ++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 1f0c3028987a..912b2aad9f2e 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -20,6 +20,8 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/mmc.h>
 
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
@@ -43,6 +45,7 @@
 
 struct sdhci_pxav2_host {
 	struct clk *clk_core;
+	struct mmc_request *sdio_mrq;
 };
 
 static void pxav2_reset(struct sdhci_host *host, u8 mask)
@@ -93,6 +96,50 @@ static u16 pxav1_readw(struct sdhci_host *host, int reg)
 	return readw(host->ioaddr + reg);
 }
 
+static u32 pxav1_irq(struct sdhci_host *host, u32 intmask)
+{
+	struct sdhci_pxav2_host *pxav2_host = sdhci_pltfm_priv(sdhci_priv(host));
+
+	if (pxav2_host->sdio_mrq && (intmask & SDHCI_INT_CMD_MASK)) {
+		/* The dummy CMD0 for the SDIO workaround just completed */
+		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, SDHCI_INT_STATUS);
+		intmask &= ~SDHCI_INT_CMD_MASK;
+		mmc_request_done(host->mmc, pxav2_host->sdio_mrq);
+		pxav2_host->sdio_mrq = NULL;
+	}
+
+	return intmask;
+}
+
+static void pxav1_request_done(struct sdhci_host *host, struct mmc_request *mrq)
+{
+	u16 tmp;
+	struct sdhci_pxav2_host *pxav2_host;
+
+	/* If this is an SDIO command, perform errata workaround for silicon bug */
+	if (mrq->cmd && !mrq->cmd->error &&
+	    (mrq->cmd->opcode == SD_IO_RW_DIRECT ||
+	     mrq->cmd->opcode == SD_IO_RW_EXTENDED)) {
+		/* Reset data port */
+		tmp = readw(host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+		tmp |= 0x400;
+		writew(tmp, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+
+		/* Clock is now stopped, so restart it by sending a dummy CMD0 */
+		pxav2_host = sdhci_pltfm_priv(sdhci_priv(host));
+		pxav2_host->sdio_mrq = mrq;
+		sdhci_writel(host, 0, SDHCI_ARGUMENT);
+		sdhci_writew(host, 0, SDHCI_TRANSFER_MODE);
+		sdhci_writew(host, SDHCI_MAKE_CMD(MMC_GO_IDLE_STATE, SDHCI_CMD_RESP_NONE),
+			     SDHCI_COMMAND);
+
+		/* Don't finish this request until the dummy CMD0 finishes */
+		return;
+	}
+
+	mmc_request_done(host->mmc, mrq);
+}
+
 static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
@@ -117,10 +164,12 @@ static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
 static const struct sdhci_ops pxav1_sdhci_ops = {
 	.read_w        = pxav1_readw,
 	.set_clock     = sdhci_set_clock,
+	.irq           = pxav1_irq,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.set_bus_width = pxav2_mmc_set_bus_width,
 	.reset         = pxav2_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.request_done  = pxav1_request_done,
 };
 
 static const struct sdhci_ops pxav2_sdhci_ops = {
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux