Re: Boot failure regression on 6.0.10 stable kernel on iMX7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/30/22 21:51, Francesco Dolcini wrote:
On Wed, Nov 30, 2022 at 03:41:13PM +0100, Marek Vasut wrote:
On 11/30/22 14:52, Francesco Dolcini wrote:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.0.10 (francesco@francesco-nb) (arm-linux-gnueabihf-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.
4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #36 SMP Wed Nov 30 14:07:15 CET 2022
...
[    4.407499] gpmi-nand: error parsing ofpart partition /soc/nand-controller@33002000/partition@0 (/soc/nand-controller
@33002000)
[    4.438401] gpmi-nand 33002000.nand-controller: driver registered.
...
[    5.933906] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -19
[    5.946504] Please append a correct "root=" boot option; here are the available partitions:
...

Any idea? I'm not familiar with the gpmi-nand driver and I would just revert it, but
maybe you have a better idea.

Can you share the relevant snippet of your nand controller DT node ?

We just have

from imx7-colibri.dtsi,

   &gpmi {
   	fsl,use-minimum-ecc;
   	nand-ecc-mode = "hw";
   	nand-on-flash-bbt;
   	pinctrl-names = "default";
   	pinctrl-0 = <&pinctrl_gpmi_nand>;
   };

OF partition are created by U-Boot from
   mtdparts=mtdparts=gpmi-nand:512k(mx7-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)
env variables calling fdt_fixup_mtdparts from colibri_imx7.c

Everything is available in the upstream Linux/U-Boot git, no downstream
repo of any sort.

Probably up to first partition is enough. I suspect you need to fill in the
correct address-cells/size-cells there, which might be currently missing in
your DT and worked by chance.

This is generated by U-Boot, I would need to dump what he did generate
from the standard fdt_fixup_mtdparts(). I will try to do it tomorrow
unless what I wrote here is already enough to understand what's going
on.

Oh drat ... I see. It's the u-boot fdt_node_set_part_info() which checks the current NAND controller #size-cells and uses that when generating MTD partitions 'reg' properties. Since #size-cells is now zero, the reg properties would be malformed.

Now, what I am unsure is whether the right fix is to update mx7 colibri DT and include &gpmi { #size-cells=<1>; }; , or , revert this patch. The former fixes the problem for colibri and retains the correct #size-cells=<0> behavior for any other board which does not specify MTD partitions in the GPMI NAND node. The later also covers boards which we don't know about which might also use generated MTD partitions in DT using fdt_fixup_mtdparts() in U-Boot, but I am not convinced that is correct.

So, would you be OK with fixing up the colibri mx7 DT with #size-cells=<1> ?



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux