On 28.11.2022 18:12, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.
>
> Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
> - Based on linux-next.
>
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 0340ed21be05..e4a2440ce544 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -649,6 +649,26 @@ ufs_mem_phy_lanes: phy@4807400 {
> };
> };
>
> + qupv3_id_0: geniqup@4ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x4ac0000 0x2000>;
Please pad address to 8 hex digits, same below.
Konrad
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + uart4: serial@4a90000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0x4a90000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> +
> usb_1: usb@4ef8800 {
> compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
> reg = <0x04ef8800 0x400>;
