Configure the node for the NQ310 chip found on this device, which is
compatible with generic nxp-nci-i2c driver.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
RESEND to fix Cc
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 2920504461d3..fde93cbcd180 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -63,6 +63,21 @@ touchscreen@48 {
};
};
+&i2c_5 {
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,nq310", "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&pm8953_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
--
2.38.1
