The node names should be generic and DT schema expects certain pattern:
freescale/imx8mm-emcon-avari.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 0dbdc9ec3fe5..3d859a350bd5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -18,14 +18,14 @@ som_leds: leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_led>;
- green {
+ led-green {
label = "som:green";
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
- red {
+ led-red {
label = "som:red";
gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 4c8904fba1c1..7605802f294d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -64,7 +64,7 @@ button-3 {
leds {
compatible = "pwm-leds";
- led1 {
+ led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
max-brightness = <248>;
--
2.34.1
