From: Fabio Estevam <festevam@xxxxxxx>
"none", "phy0tx" and "hci0-power" are not valid values for the
linux,default-trigger property and trigger the following warnings when
running:
make dtbs_check DT_SCHEMA_FILES=leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: user-led4:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'none' does not match '^mmc[0-9]+$'
'none' does not match '^cpu[0-9]*$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: wlan-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'phy0tx' does not match '^mmc[0-9]+$'
'phy0tx' does not match '^cpu[0-9]*$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: bt-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'hci0-power' does not match '^mmc[0-9]+$'
'hci0-power' does not match '^cpu[0-9]*$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Remove the invalid linux,default-trigger entries.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Fixes: 68ca364d4812 ("arm64: dts: freescale: Add devicetree support for Thor96 board")
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..170e00c2447f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -35,7 +35,6 @@ user-led1 {
user-led2 {
label = "green:user2";
gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "none";
};
user-led3 {
@@ -49,20 +48,17 @@ user-led4 {
label = "green:user4";
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
panic-indicator;
- linux,default-trigger = "none";
};
wlan-active-led {
label = "yellow:wlan";
gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
default-state = "off";
};
bt-active-led {
label = "blue:bt";
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "hci0-power";
default-state = "off";
};
};
--
2.25.1
