Re: [PATCH v2 3/9] arm64: dts: qcom: sdm450: Add device tree for Motorola Moto G6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 19.11.2022 21:37, Luca Weiss wrote:
> From: Julian Braha <julianbraha@xxxxxxxxx>
> 
> Add device tree for the Motorola Moto G6 (ali) smartphone. This device
> is based on Snapdragon 450 (sdm450) SoC which is a variant of MSM8953.
> 
> Signed-off-by: Julian Braha <julianbraha@xxxxxxxxx>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

> Changes in v2:
> * address review comments from v1
Veeeeeeery vauge!

Konrad
> 
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/sdm450-motorola-ali.dts     | 250 ++++++++++++++++++
>  2 files changed, 251 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index afe496a93f94..6bc1be0d525a 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
> new file mode 100644
> index 000000000000..43e2941f98d9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
> @@ -0,0 +1,250 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Julian Braha <julianbraha@xxxxxxxxx>
> + */
> +/dts-v1/;
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +#include "pmi8950.dtsi"
> +
> +/delete-node/ &qseecom_mem;
> +
> +/ {
> +	model = "Motorola Moto G6";
> +	compatible = "motorola,ali", "qcom,sdm450";
> +	chassis-type = "handset";
> +	qcom,msm-id = <338 0>;
> +	qcom,board-id = <0x43 0xc200>;
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		key-volume-up {
> +			label = "volume_up";
> +			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		qseecom_mem: qseecom@84300000 {
> +			reg = <0x0 0x84300000 0x0 0x2000000>;
> +			no-map;
> +		};
> +
> +		ramoops@ef000000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0xef000000 0x0 0xc0000>;
> +			console-size = <0x40000>;
> +		};
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&hsusb_phy {
> +	vdd-supply = <&pm8953_l3>;
> +	vdda-pll-supply = <&pm8953_l7>;
> +	vdda-phy-dpdm-supply = <&pm8953_l13>;
> +
> +	status = "okay";
> +};
> +
> +&i2c_3 {
> +	status = "okay";
> +
> +	touchscreen@38 {
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
> +		vcc-supply = <&pm8953_l10>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_int_active &ts_reset_active>;
> +
> +		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> +		touchscreen-size-x = <1080>;
> +		touchscreen-size-y = <2160>;
> +	};
> +};
> +
> +&pm8953_resin {
> +	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
> +};
> +
> +&pmi8950_wled {
> +	qcom,num-strings = <3>;
> +	qcom,external-pfet;
> +	qcom,cabc;
> +
> +	status = "okay";
> +};
> +
> +&rpm_requests {
> +	regulators {
> +		compatible = "qcom,rpm-pm8953-regulators";
> +
> +		vdd_s1-supply = <&vph_pwr>;
> +		vdd_s2-supply = <&vph_pwr>;
> +		vdd_s3-supply = <&vph_pwr>;
> +		vdd_s4-supply = <&vph_pwr>;
> +		vdd_s5-supply = <&vph_pwr>;
> +		vdd_s6-supply = <&vph_pwr>;
> +		vdd_s7-supply = <&vph_pwr>;
> +		vdd_l1-supply = <&pm8953_s3>;
> +		vdd_l2_l3-supply = <&pm8953_s3>;
> +		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
> +		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
> +		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
> +
> +		pm8953_s1: s1 {
> +			regulator-min-microvolt = <795000>;
> +			regulator-max-microvolt = <1081000>;
> +		};
> +
> +		pm8953_s3: s3 {
> +			regulator-min-microvolt = <1224000>;
> +			regulator-max-microvolt = <1224000>;
> +		};
> +
> +		pm8953_s4: s4 {
> +			regulator-min-microvolt = <1900000>;
> +			regulator-max-microvolt = <2050000>;
> +		};
> +
> +		pm8953_l1: l1 {
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1100000>;
> +		};
> +
> +		pm8953_l2: l2 {
> +			regulator-min-microvolt = <975000>;
> +			regulator-max-microvolt = <1225000>;
> +		};
> +
> +		pm8953_l3: l3 {
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <925000>;
> +		};
> +
> +		pm8953_l5: l5 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		pm8953_l6: l6 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		pm8953_l7: l7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1900000>;
> +		};
> +
> +		pm8953_l8: l8 {
> +			regulator-min-microvolt = <2900000>;
> +			regulator-max-microvolt = <2900000>;
> +		};
> +
> +		pm8953_l9: l9 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +
> +		pm8953_l10: l10 {
> +			regulator-min-microvolt = <2850000>;
> +			regulator-max-microvolt = <2850000>;
> +		};
> +
> +		pm8953_l11: l11 {
> +			regulator-min-microvolt = <2950000>;
> +			regulator-max-microvolt = <2950000>;
> +		};
> +
> +		pm8953_l12: l12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2950000>;
> +		};
> +
> +		pm8953_l13: l13 {
> +			regulator-min-microvolt = <3125000>;
> +			regulator-max-microvolt = <3125000>;
> +		};
> +
> +		pm8953_l16: l16 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		pm8953_l17: l17 {
> +			regulator-min-microvolt = <2850000>;
> +			regulator-max-microvolt = <2850000>;
> +		};
> +
> +		pm8953_l19: l19 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1350000>;
> +		};
> +
> +		pm8953_l22: l22 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2850000>;
> +		};
> +
> +		pm8953_l23: l23 {
> +			regulator-min-microvolt = <975000>;
> +			regulator-max-microvolt = <1225000>;
> +		};
> +	};
> +};
> +
> +&sdhc_1 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on  &sdc1_rclk_on>;
> +	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
> +
> +	status = "okay";
> +};
> +
> +&sdhc_2 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <95 5>, <111 1>, <126 1>;
> +
> +	ts_int_active: ts-int-active-state {
> +		pins = "gpio65";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-pull-up;
> +	};
> +
> +	ts_reset_active: ts-reset-active-state {
> +		pins = "gpio64";
> +		function = "gpio";
> +		drive-strength = <0x08>;
> +		bias-pull-up;
> +	};
> +};
> +
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&usb3_dwc3 {
> +	dr_mode = "peripheral";
> +};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux