On 15:58-20221114, Robert Nelson wrote:
[...]
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 4555a5be2257..cf7c509538a4 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
>
> +dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> new file mode 100644
> index 000000000000..55ffa9ba6c3a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> @@ -0,0 +1,1110 @@
> +// SPDX-License-Identifier: GPL-2.0
[...]
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&led_pins_default>;
> +
> + led-0 {
> + gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
> + function = LED_FUNCTION_HEARTBEAT;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + led-1 {
> + gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
> + function = LED_FUNCTION_DISK_ACTIVITY;
> + linux,default-trigger = "mmc0";
> + };
> +
> + led-2 {
> + gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
> + function = LED_FUNCTION_CPU;
> + linux,default-trigger = "cpu";
> + };
> +
> + led-3 {
> + gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
> + function = LED_FUNCTION_DISK_ACTIVITY;
> + linux,default-trigger = "mmc1";
> + };
> +
> + led-4 {
> + gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tx";
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/leds/common.yaml#n82
we'd be Violating the oneOf conditions here.
> + function = LED_FUNCTION_WLAN;
> + default-state = "off";
> + };
> + };
> +
> + evm_12v0: regulator-0 {
> + /* main supply */
> + compatible = "regulator-fixed";
> + regulator-name = "evm_12v0";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vsys_3v3: regulator-1 {
> + /* Output of LMS140 */
> + compatible = "regulator-fixed";
> + regulator-name = "vsys_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&evm_12v0>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vsys_5v0: regulator-2 {
> + /* Output of LM5140 */
> + compatible = "regulator-fixed";
> + regulator-name = "vsys_5v0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&evm_12v0>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_mmc1: regulator-3 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd_pwr_en_pins_default>;
> + regulator-name = "vdd_mmc1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + enable-active-high;
> + vin-supply = <&vsys_3v3>;
> + gpios = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
s/gpios/gpio ?
> + };
> +
> + vdd_sd_dv_alt: regulator-4 {
> + compatible = "regulator-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
> + regulator-name = "tlv71033";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + vin-supply = <&vsys_5v0>;
> + gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
> + states = <1800000 0x0>,
> + <3300000 0x1>;
> + };
> +
> + dp_pwr_3v3: regulator-5 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp0_3v3_en_pins_default>;
> + regulator-name = "dp-pwr";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
Same here - gpio ?
> + enable-active-high;
> + };
[...]
> +
> +
> +&main_gpio0 {
> + gpio-line-names = "", "P9_11", "P9_13", "P8_17", "P8_18", /* 0-4 */
> + "P8_22", "P8_24", "P8_34", "P8_36", "P8_38A", /* 5-9 */
> + "P9_23", "P8_37B", "P9_26B", "P9_24B", "P8_08", /* 10-14 */
> + "P8_07", "P8_10", "P8_09", "P9_42B", "", /* 15-19 */
> + "P8_03", "TYPEC_PWR_ST", "M2_RSTz", "M2_I2C_ALERT#", "P8_35A", /* 20-24 */
> + "P8_33A", "P8_32A", "", "P9_17A", "", /* 25-29 */
> + "P8_21", "P8_23", "P8_31A", "P8_05", "P8_06", /* 30-34 */
> + "P8_25", "M2_W_DISABLE1#", "M2_W_DISABLE2#", "P9_22A (BOOTMODE1)", "P9_21A", /* 35-39 */
> + "P9_18A", "DSI_I2C_SCL", "DSI_I2C_SDA", "P9_28B", "P9_30B", /* 40-44 */
> + "P9_12", "P9_27A", "P9_15", "P8_04 (BOOTMODE2)", "VCC_DP_EN", /* 45-49 */
> + "P9_33B", "P8_26", "P9_31B", "P9_29B", "P9_39B", /* 50-54 */
> + "P9_35B", "P9_36B", "P9_37B", "P9_38B", "P8_12", /* 55-59 */
> + "P8_11 (BOOTMODE7)", "P8_15", "P8_16", "", "", /* 60-64 */
> + "P8_43", "P8_44", "P8_41", "P8_42 (BOOTMODE6)", "P8_39", /* 65-69 */
> + "P8_40", "P8_27", "P8_28", "P8_29", "P8_30", /* 70-74 */
> + "P8_14", "P8_20", "P9_20B", "P9_19B", "P8_45", /* 75-79 */
> + "P8_46 (BOOTMODE3)", "P9_40B", "VDD_SD_EN", "CSI_I2C_SCL", "CSI_I2C_SDA", /* 80-84 */
> + "M2_I2S_SCK", "M2_I2S_WS", "M2_I2S_IN", "P8_19", "P8_13", /* 85-89 */
> + "P9_21B", "P9_22B", "M2_I2S_OUT", "P9_14", "P9_16", /* 90-94 */
> + "USR1", "USR0", "USR2", "DSI_GPIO1", "FAN_PWM", /* 95-99 */
> + "FAN_TACH", "CSI1_GPIO1", "CSI0_GPIO2", "CSI0_GPIO1", "P9_25B", /* 100-104 */
> + "P8_38B", "P8_37A", "CSI1_GPIO2", "DSI_GPIO2", "USR4", /* 105-109 */
> + "USR3", "P8_33B", "DP_HPD", "M2_UART_CTSn", "M2_UART_RTSn", /* 110-114 */
> + "P9_17B", "P8_35B", "VDD_SD_SEL", "P9_26A", "P9_24A", /* 115-119 */
> + "P9_18B", "CONSOLE_RX", "CONSOLE_TX", "P9_42A", "P9_27B", /* 120-124 */
> + "M2_UART_RX", "M2_UART_TX", "P9_25A"; /* 125-127 */
Can we drop the gpio-line-names description for now?
gpio-line-names: maxItems: 32 in
Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml - that probably
should be fixed prior to this else we get the dtbs_check warning around
this. The max count actually depends on ti,ngpio - So, I think the
schema is probably not accurate here.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
