From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> Implement a regulator driver with IRQ support for fault management. Written against documentation [1] and [2] and tested on real hardware. Every channel has its own regulator supplies nammed 'vss1-supply' and 'vss2-supply'. The regulator supply is used to determine the output voltage, as the smart switch provides no output regulation. The driver requires the 'shunt-resistor-micro-ohms' property to be present in Device Tree to properly calculate current related values. Datasheet links: 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> Signed-off-by: Marcello Sylvester Bauer <sylv@xxxxxxx> Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx> --- drivers/mfd/Kconfig | 12 +++++ drivers/mfd/Makefile | 1 + drivers/mfd/max597x.c | 92 ++++++++++++++++++++++++++++++++ include/linux/mfd/max597x.h | 103 ++++++++++++++++++++++++++++++++++++ 4 files changed, 208 insertions(+) create mode 100644 drivers/mfd/max597x.c create mode 100644 include/linux/mfd/max597x.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8b93856de432..416fe7986b7b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -253,6 +253,18 @@ config MFD_MADERA_SPI Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via SPI. +config MFD_MAX597X + tristate "Maxim 597x Power Switch and Monitor" + depends on I2C + depends on OF + select MFD_CORE + select REGMAP_I2C + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + Also it supports upto 4 indication LEDs. + config MFD_CS47L15 bool "Cirrus Logic CS47L15" select PINCTRL_CS47L15 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 7ed3ef4a698c..819d711fa748 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o +obj-$(CONFIG_MFD_MAX597X) += max597x.o obj-$(CONFIG_MFD_MAX77620) += max77620.o obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o diff --git a/drivers/mfd/max597x.c b/drivers/mfd/max597x.c new file mode 100644 index 000000000000..ae43d57cde26 --- /dev/null +++ b/drivers/mfd/max597x.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Maxim MAX5970/MAX5978 Power Switch & Monitor + * + * Copyright (c) 2022 9elements GmbH + * + * Author: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> + */ + +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max597x.h> +#include <linux/regmap.h> + +static const struct regmap_config max597x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX_REGISTERS, +}; + +static const struct mfd_cell max597x_cells[] = { + { .name = "max597x-regulator", }, + { .name = "max597x-iio", }, + { .name = "max597x-led", }, +}; + +static int max597x_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct max597x_data *ddata; + enum max597x_chip_type chip = id->driver_data; + + ddata = devm_kzalloc(&i2c->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + /* + * Based on chip type, Initialize the number of switch. This is needed by + * regulator & iio cells. + */ + switch (chip) { + case MAX597x_TYPE_MAX5970: + ddata->num_switches = MAX5970_NUM_SWITCHES; + break; + case MAX597x_TYPE_MAX5978: + ddata->num_switches = MAX5978_NUM_SWITCHES; + break; + } + + ddata->regmap = devm_regmap_init_i2c(i2c, &max597x_regmap_config); + if (IS_ERR(ddata->regmap)) { + dev_err(&i2c->dev, "Failed to initialize regmap"); + return PTR_ERR(ddata->regmap); + } + + /* IRQ used by regulator cell */ + ddata->irq = i2c->irq; + ddata->dev = &i2c->dev; + i2c_set_clientdata(i2c, ddata); + + return devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO, + max597x_cells, ARRAY_SIZE(max597x_cells), + NULL, 0, NULL); +} + +static const struct i2c_device_id max597x_table[] = { + { .name = "max5970", MAX597x_TYPE_MAX5970 }, + { .name = "max5978", MAX597x_TYPE_MAX5978 }, +}; + +MODULE_DEVICE_TABLE(i2c, max597x_table); + +static const struct of_device_id max597x_of_match[] = { + { .compatible = "maxim,max5970", .data = (void *)MAX597x_TYPE_MAX5970 }, + { .compatible = "maxim,max5978", .data = (void *)MAX597x_TYPE_MAX5978 }, + {} +}; + +MODULE_DEVICE_TABLE(of, max597x_of_match); + +static struct i2c_driver max597x_driver = { + .id_table = max597x_table, + .driver = { + .name = "max597x", + .of_match_table = of_match_ptr(max597x_of_match), + }, + .probe = max597x_probe, +}; +module_i2c_driver(max597x_driver); + +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("MAX597X Power Switch and Monitor"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h new file mode 100644 index 000000000000..99a047e66b44 --- /dev/null +++ b/include/linux/mfd/max597x.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Maxim MAX5970/MAX5978 Power Switch & Monitor + * + * Copyright (c) 2022 9elements GmbH + * + * Author: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> + */ + +#ifndef MFD_MAX597X_H +#define MFD_MAX597X_H + +#include <linux/device.h> +#include <linux/regmap.h> + +/* Number of switch based on chip variant */ +#define MAX5970_NUM_SWITCHES 2 +#define MAX5978_NUM_SWITCHES 1 +/* Both chip variant have 4 indication LEDs used by LED cell */ +#define MAX597X_NUM_LEDS 4 + +enum max597x_chip_type { + MAX597x_TYPE_MAX5978 = 1, + MAX597x_TYPE_MAX5970, +}; + +#define MAX5970_REG_CURRENT_L(ch) (0x01 + (ch) * 4) +#define MAX5970_REG_CURRENT_H(ch) (0x00 + (ch) * 4) +#define MAX5970_REG_VOLTAGE_L(ch) (0x03 + (ch) * 4) +#define MAX5970_REG_VOLTAGE_H(ch) (0x02 + (ch) * 4) +#define MAX5970_REG_MON_RANGE 0x18 +#define MAX5970_MON_MASK 0x3 +#define MAX5970_MON(reg, ch) (((reg) >> ((ch) * 2)) & MAX5970_MON_MASK) +#define MAX5970_MON_MAX_RANGE_UV 16000000 + +#define MAX5970_REG_CH_UV_WARN_H(ch) (0x1A + (ch) * 10) +#define MAX5970_REG_CH_UV_WARN_L(ch) (0x1B + (ch) * 10) +#define MAX5970_REG_CH_UV_CRIT_H(ch) (0x1C + (ch) * 10) +#define MAX5970_REG_CH_UV_CRIT_L(ch) (0x1D + (ch) * 10) +#define MAX5970_REG_CH_OV_WARN_H(ch) (0x1E + (ch) * 10) +#define MAX5970_REG_CH_OV_WARN_L(ch) (0x1F + (ch) * 10) +#define MAX5970_REG_CH_OV_CRIT_H(ch) (0x20 + (ch) * 10) +#define MAX5970_REG_CH_OV_CRIT_L(ch) (0x21 + (ch) * 10) + +#define MAX5970_VAL2REG_H(x) (((x) >> 2) & 0xFF) +#define MAX5970_VAL2REG_L(x) ((x) & 0x3) + +#define MAX5970_REG_DAC_FAST(ch) (0x2E + (ch)) + +#define MAX5970_FAST2SLOW_RATIO 200 + +#define MAX5970_REG_STATUS0 0x31 +#define MAX5970_CB_IFAULTF(ch) (1 << (ch)) +#define MAX5970_CB_IFAULTS(ch) (1 << ((ch) + 4)) + +#define MAX5970_REG_STATUS1 0x32 +#define STATUS1_PROT_MASK 0x3 +#define STATUS1_PROT(reg) \ + (((reg) >> 6) & STATUS1_PROT_MASK) +#define STATUS1_PROT_SHUTDOWN 0 +#define STATUS1_PROT_CLEAR_PG 1 +#define STATUS1_PROT_ALERT_ONLY 2 + +#define MAX5970_REG_STATUS2 0x33 +#define MAX5970_IRNG_MASK 0x3 +#define MAX5970_IRNG(reg, ch) \ + (((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK) + +#define MAX5970_REG_STATUS3 0x34 +#define MAX5970_STATUS3_ALERT BIT(4) +#define MAX5970_STATUS3_PG(ch) BIT(ch) + +#define MAX5970_REG_FAULT0 0x35 +#define UV_STATUS_WARN(ch) BIT(ch) +#define UV_STATUS_CRIT(ch) BIT(ch + 4) + +#define MAX5970_REG_FAULT1 0x36 +#define OV_STATUS_WARN(ch) BIT(ch) +#define OV_STATUS_CRIT(ch) BIT(ch + 4) + +#define MAX5970_REG_FAULT2 0x37 +#define OC_STATUS_WARN(ch) BIT(ch) + +#define MAX5970_REG_CHXEN 0x3b +#define CHXEN(ch) (3 << (ch * 2)) + +#define MAX5970_REG_LED_FLASH 0x43 + +#define MAX_REGISTERS 0x49 +#define ADC_MASK 0x3FF + +struct max597x_data { + struct device *dev; + int irq; + int num_switches; + struct regmap *regmap; + /* Chip specific parameters needed by regulator & iio cells */ + u32 irng[MAX5970_NUM_SWITCHES]; + u32 mon_rng[MAX5970_NUM_SWITCHES]; + u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES]; +}; + +#endif \ No newline at end of file -- 2.37.3