Codecs in this family have multiple digital I/O functions for audio, DSP subsystem, GPIO and various special functions. All muxable pins are selectable as either a GPIO or one of the available alternate functions. Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> --- .../bindings/pinctrl/cirrus,cs48l32.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,cs48l32.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,cs48l32.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,cs48l32.yaml new file mode 100644 index 000000000000..b24fbae6a8f8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,cs48l32.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cirrus,cs48l32.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS48L32 audio codec pinctrl driver + +maintainers: + - patches@xxxxxxxxxxxxxxxxxxxxx + +description: | +The Cirrus Logic CS48L32 codec has a number of GPIO functions for +interfacing to external hardware. Certain groups of GPIO pins also +have an alternate function. + +The properties for this driver exist within the parent MFD driver node. +See the core bindings for the parent MFD driver for an example: + + Documentation/devicetree/bindings/mfd/cirrus,cs48l32.yaml + +And the generic pinctrl bindings: + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +properties: + pin-settings: + description: + One subnode is required to contain the default settings. It + contains an arbitrary number of configuration subnodes, one for + each group or pin configuration you want to apply as a default. + type: object + patternProperties: + '-pins$': + type: object + allOf: + - $ref: "pincfg-node.yaml#" + - $ref: "pinmux-node.yaml#" + properties: + groups: + description: + Name of one pin group to configure. + enum: [ asp1, asp2, in1-pdm, in2-pdm, + gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, + gpio14, gpio15, gpio16 ] + + function: + description: + Name of function to assign to this group. + enum: [ asp1, asp2, in1-pdm, in2-pdm, spi2, io, dsp-gpio, + irq1, fll1-clk, fll1-lock, opclk, opclk-dsp, uart, + input-path-signal-detect, + ultrasonic-in1-activity-detect, ultrasonic-in2-activity-detect, + dma-ch0-programmable-transfer-complete, + dma-ch1-programmable-transfer-complete, + dma-ch2-programmable-transfer-complete, + dma-ch3-programmable-transfer-complete, + dma-ch4-programmable-transfer-complete, + dma-ch5-programmable-transfer-complete, + dma-ch6-programmable-transfer-complete, + dma-ch7-programmable-transfer-complete, + sample-rate-change-trigger-a, sample-rate-change-trigger-b, + sample-rate-change-trigger-c, sample-rate-change-trigger-d, + timer1-irq-ch1, timer1-irq-ch2, timer1-irq-ch3, timer1-irq-ch4, + timer2-irq-ch1, timer2-irq-ch2, timer2-irq-ch3, timer2-irq-ch4, + timer3-irq-ch1, timer3-irq-ch2, timer3-irq-ch3, timer3-irq-ch4, + timer4-irq-ch1, timer4-irq-ch2, timer4-irq-ch3, timer4-irq-ch4, + timer5-irq-ch1, timer5-irq-ch2, timer5-irq-ch3, timer5-irq-ch4, + timer-1, timer-2, timer-3, timer-4, timer-5 ] + + bias-disable: true + + bias-bus-hold: true + + bias-pull-up: true + + bias-pull-down: true + + drive-push-pull: true + + drive-open-drain: true + + drive-strength: + description: + Drive strength in mA. + enum: [ 4, 8 ] + + output-low: true + + output-high: true + + additionalProperties: false + + required: + - groups + + additionalProperties: false -- 2.30.2
