Re: [PATCH 4/4] drm/msm/disp/dpu1: add color management support for the crtc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/11/2022 15:39, Kalyan Thota wrote:


-----Original Message-----
From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Sent: Wednesday, November 9, 2022 6:02 PM
To: Kalyan Thota (QUIC) <quic_kalyant@xxxxxxxxxxx>; dri-
devel@xxxxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx;
freedreno@xxxxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx; robdclark@xxxxxxxxxxxx;
dianders@xxxxxxxxxxxx; swboyd@xxxxxxxxxxxx; Vinod Polimera (QUIC)
<quic_vpolimer@xxxxxxxxxxx>; Abhinav Kumar (QUIC)
<quic_abhinavk@xxxxxxxxxxx>
Subject: Re: [PATCH 4/4] drm/msm/disp/dpu1: add color management support
for the crtc

WARNING: This email originated from outside of Qualcomm. Please be wary of
any links or attachments, and do not enable macros.

On 09/11/2022 15:16, Kalyan Thota wrote:
Add color management support for the crtc provided there are enough
dspps that can be allocated from the catalogue

Signed-off-by: Kalyan Thota <quic_kalyant@xxxxxxxxxxx>
---
   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 15 ++++++--
   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h    |  6 ++++
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 11 +++---
   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 53
+++++++++++++++++++++++++++++
   4 files changed, 77 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 4170fbe..6bd3a64 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -18,9 +18,11 @@
   #include <drm/drm_flip_work.h>
   #include <drm/drm_framebuffer.h>
   #include <drm/drm_mode.h>
+#include <drm/drm_mode_object.h>
   #include <drm/drm_probe_helper.h>
   #include <drm/drm_rect.h>
   #include <drm/drm_vblank.h>
+#include "../../../drm_crtc_internal.h"

If it's internal, it is not supposed to be used by other parties, including the msm
drm. At least a comment why you are including this file would be helpful.

This header file was included to make use of " drm_mode_obj_find_prop_id" function from DRM framework.
Should I add a comment near function definition ?

No, it would have been better to add a comment near the #include directive. However if this is the only user, you don't need it at all. You see, you know whether the CRTC has color management propreties at the time of creation. And this can not change. So, you just add a boolean to dpu_crtc (or dpu_crtc_state, whichever suits better).


   #include "dpu_kms.h"
   #include "dpu_hw_lm.h"
@@ -553,6 +555,17 @@ static void _dpu_crtc_complete_flip(struct drm_crtc
*crtc)
       spin_unlock_irqrestore(&dev->event_lock, flags);
   }

+bool dpu_crtc_has_color_enabled(struct drm_crtc *crtc) {
+     u32 ctm_id = crtc->dev->mode_config.ctm_property->base.id;
+     u32 gamma_id = crtc->dev->mode_config.gamma_lut_property->base.id;
+     u32 degamma_id =
+crtc->dev->mode_config.degamma_lut_property->base.id;
+
+     return !!(drm_mode_obj_find_prop_id(&crtc->base, ctm_id) ||
+                drm_mode_obj_find_prop_id(&crtc->base, gamma_id) ||
+                drm_mode_obj_find_prop_id(&crtc->base, degamma_id));
+}
+
   enum dpu_intf_mode dpu_crtc_get_intf_mode(struct drm_crtc *crtc)
   {
       struct drm_encoder *encoder;
@@ -1604,8 +1617,6 @@ struct drm_crtc *dpu_crtc_init(struct drm_device
*dev, struct drm_plane *plane,

       drm_crtc_helper_add(crtc, &dpu_crtc_helper_funcs);

-     drm_crtc_enable_color_mgmt(crtc, 0, true, 0);
-
       /* save user friendly CRTC name for later */
       snprintf(dpu_crtc->name, DPU_CRTC_NAME_SIZE, "crtc%u",
crtc->base.id);

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
index 539b68b..8bac395 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
@@ -300,4 +300,10 @@ static inline enum dpu_crtc_client_type
dpu_crtc_get_client_type(
       return crtc && crtc->state ? RT_CLIENT : NRT_CLIENT;
   }

+/**
+ * dpu_crtc_has_color_enabled - check if the crtc has color
+management enabled
+ * @crtc: Pointer to drm crtc object
+ */
+bool dpu_crtc_has_color_enabled(struct drm_crtc *crtc);
+
   #endif /* _DPU_CRTC_H_ */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 4c56a16..ebc3f25 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -545,7 +545,8 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder
*drm_enc)
   static struct msm_display_topology dpu_encoder_get_topology(
                       struct dpu_encoder_virt *dpu_enc,
                       struct dpu_kms *dpu_kms,
-                     struct drm_display_mode *mode)
+                     struct drm_display_mode *mode,
+                     struct drm_crtc *crtc)
   {
       struct msm_display_topology topology = {0};
       int i, intf_count = 0;
@@ -573,11 +574,9 @@ static struct msm_display_topology
dpu_encoder_get_topology(
       else
               topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT)
? 2 : 1;

-     if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI) {
-             if (dpu_kms->catalog->dspp &&
-                     (dpu_kms->catalog->dspp_count >= topology.num_lm))
+     if (dpu_crtc_has_color_enabled(crtc) &&
+             (dpu_kms->catalog->dspp_count >= topology.num_lm))

See the comment to the previous patch. It still applies here.

                       topology.num_dspp = topology.num_lm;
-     }

       topology.num_enc = 0;
       topology.num_intf = intf_count;
@@ -643,7 +642,7 @@ static int dpu_encoder_virt_atomic_check(
               }
       }

-     topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode);
+     topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode,
+ crtc_state->crtc);

       /* Reserve dynamic resources now. */
       if (!ret) {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 552a89c..47a73fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -13,6 +13,7 @@
   #include <linux/dma-buf.h>
   #include <linux/of_irq.h>
   #include <linux/pm_opp.h>
+#include <linux/bitops.h>

   #include <drm/drm_crtc.h>
   #include <drm/drm_file.h>
@@ -537,6 +538,44 @@ static void dpu_kms_wait_flush(struct msm_kms
*kms, unsigned crtc_mask)
               dpu_kms_wait_for_commit_done(kms, crtc);
   }

+/**
+ * _dpu_kms_possible_dspps - Evaluate how many dspps pairs can be
facilitated
+                             to enable color features for crtcs.
+ * @dpu_kms:    Pointer to dpu kms structure
+ * Returns:     count of dspp pairs
+ *
+ * Baring single entry, if atleast 2 dspps are available in the
+catalogue,
+ * then color can be enabled for that crtc  */ static inline u32
+_dpu_kms_possible_dspps(struct dpu_kms *dpu_kms) {
+
+     u32 num_dspps = dpu_kms->catalog->dspp_count;
+
+     if (num_dspps > 1)
+             num_dspps =
+                     !(num_dspps % 2) ? num_dspps / 2 : (num_dspps -
+ 1) / 2;

Ugh. No. Please spell this clearly rather than using nice math and ternary
operators:

if (num_dspps <= 1)
   return num_dspps;
else
   return num_dspps / 2;

You see, if num_dspps %2 ! =0, then num_dspps / 2 == (num_dspps_2 - 1) / 2.


+
+     return num_dspps;
+}
+
+static u32 _dpu_kms_attach_color(struct drm_device *dev, u32 enc_mask,
+                                             u32 num_dspps) {
+     struct drm_encoder *encoder;
+     struct drm_crtc *crtc;
+
+     drm_for_each_encoder_mask(encoder, dev, enc_mask) {
+             crtc = drm_crtc_from_index(dev, ffs(encoder->possible_crtcs) - 1);
+             if (num_dspps && crtc) {
+                     drm_crtc_enable_color_mgmt(crtc, 0, true, 0);
+                     num_dspps--;

Please.  You can do this at the time you create the crtc. It would be much simpler.

+             }
+     }
+
+     return num_dspps;
+}
+
   static int _dpu_kms_initialize_dsi(struct drm_device *dev,
                                   struct msm_drm_private *priv,
                                   struct dpu_kms *dpu_kms) @@ -747,6
+786,8 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms *dpu_kms)

       int primary_planes_idx = 0, cursor_planes_idx = 0, i, ret;
       int max_crtc_count;
+     u32 num_dspps, primary_enc_mask = 0, external_enc_mask = 0;
+
       dev = dpu_kms->dev;
       priv = dev->dev_private;
       catalog = dpu_kms->catalog;
@@ -796,6 +837,7 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms
*dpu_kms)
       }

       max_crtc_count = min(max_crtc_count, primary_planes_idx);
+     num_dspps = _dpu_kms_possible_dspps(dpu_kms);

       /* Create one CRTC per encoder */
       encoder = list_first_entry(&(dev)->mode_config.encoder_list,
@@ -808,9 +850,20 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms
*dpu_kms)
               }
               priv->crtcs[priv->num_crtcs++] = crtc;
               encoder->possible_crtcs = 1 << drm_crtc_index(crtc);
+
+             if (!dpu_encoder_is_external(encoder) &&
+                     !dpu_encoder_is_virtual(encoder))

if (dpu_encoder_internal_output(encoder))

+                     primary_enc_mask |= drm_encoder_mask(encoder);
+             else if (dpu_encoder_is_external(encoder))
+                     external_enc_mask |= drm_encoder_mask(encoder);
+
               encoder = list_next_entry(encoder, head);
       }

+     /* Prefer Primary encoders in registering for color support */
+     num_dspps = _dpu_kms_attach_color(dev, primary_enc_mask,
num_dspps);
+     num_dspps = _dpu_kms_attach_color(dev, external_enc_mask,
+ num_dspps);
+
       return 0;
   }


--
With best wishes
Dmitry


--
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux