It's absolutely redundant seeing by default each node is embedded into its own example-X node with address and size cells set to 1. Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ by the Rob' request. (@Rob) --- .../bindings/pci/snps,dw-pcie-ep.yaml | 16 ++++----- .../devicetree/bindings/pci/snps,dw-pcie.yaml | 35 ++++++++++--------- 2 files changed, 24 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index eae60901d60e..7d05dcba419b 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -46,14 +46,10 @@ additionalProperties: true examples: - | - bus { - #address-cells = <1>; - #size-cells = <1>; - pcie-ep@dfd00000 { - compatible = "snps,dw-pcie-ep"; - reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ - <0xdfc01000 0x0001000>, /* IP registers 2 */ - <0xd0000000 0x2000000>; /* Configuration space */ - reg-names = "dbi", "dbi2", "addr_space"; - }; + pcie-ep@dfd00000 { + compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; }; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 505b01e0a034..3fdc80453a85 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -53,21 +53,22 @@ required: examples: - | - bus { - #address-cells = <1>; - #size-cells = <1>; - pcie@dfc00000 { - device_type = "pci"; - compatible = "snps,dw-pcie"; - reg = <0xdfc00000 0x0001000>, /* IP registers */ - <0xd0000000 0x0002000>; /* Configuration space */ - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>, - <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; - interrupts = <25>, <24>; - #interrupt-cells = <1>; - num-lanes = <1>; - }; + pcie@dfc00000 { + compatible = "snps,dw-pcie"; + device_type = "pci"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>, + <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; + bus-range = <0x0 0xff>; + + interrupts = <25>, <24>; + #interrupt-cells = <1>; + + reset-gpios = <&port0 0 1>; + + num-lanes = <1>; }; -- 2.38.0
