Re: [PATCH v2 10/10] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dne ponedeljek, 07. november 2022 ob 01:54:33 CET je Andre Przywara 
napisal(a):
> The Lctech Pi F1C200s (also previously known under the Cherry Pi brand)
> is a small development board with the Allwinner F1C200s SoC. This is the
> same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM.
> 
> Alongside the obligatory micro-SD card slot, the board features a
> SPI-NAND flash chip, LCD and touch connectors, and unpopulated
> expansion header pins.
> There are two USB Type-C ports on the board: One supplies the power, also
> connects to the USB MUSB OTG controller port. The other one is connected
> to an CH340 USB serial chip, which in turn is connected to UART1.
> 
> Add a devicetree file, so that the board can be used easily.
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>

Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>

Best regards,
Jernej





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux