From: Sinthu Raja <sinthu.raja@xxxxxx> Hi, This series of patches add support for AM68 Starter kit(SK). AM68 SK is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC. Refer below link to J721S2/AM68 Technical Reference Manual for further details: http://www.ti.com/lit/pdf/spruj28 Design files can be referrred from https://www.ti.com/lit/zip/SPRR463 Changes in V2: Addressed all the review comments and the changes are captured in seperate patches. - Updated the commit description. - Updated the regulator nodes: fixedregulator to "regulator-" - Updated the commit $subject to align with rest of the commits. - Dropped the blank lines - Changed the node names that are added with underscore("_") with "-" V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@xxxxxx/t/#mbe43b02221733bb6eb06b203359e90ec08406afc Sinthu Raja (3): dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: ti: Add initial support for AM68 SK System on Module arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board .../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 447 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 127 +++++ 4 files changed, 577 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi -- 2.36.1
