From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> Add PCIe nodes to Banana Pi R3 SBC which is used on M.2 slot. Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> --- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi index 93ac67641351..01f92db3336a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi @@ -195,6 +195,16 @@ &i2c0 { status = "okay"; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pio { i2c_pins: i2c-pins { mux { @@ -261,6 +271,13 @@ conf-rst { }; }; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_pereset"; + }; + }; + spi_flash_pins: spi-flash-pins { mux { function = "spi"; -- 2.34.1