[RFC v3 00/11] Add BananaPi R3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

This Series adds some Nodes to mt7986 devicetree and the BananaPi R3

i included sams series for mt7986 DTS with small changes
https://patchwork.kernel.org/project/linux-mediatek/cover/20220427124741.18245-1-sam.shih@xxxxxxxxxxxx/

this series need these Patches:

i2c-support:
https://patchwork.kernel.org/project/linux-mediatek/cover/20221009101631.82380-1-linux@xxxxxxxxx/

mmc bindings:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=688675

update pinctrl-bindings:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=692462

hwrng and pinctrl (uart splitting) are already applied to next

i had run full dtbs-check but i end up with some strange warnings in
ethernet-node that should not come up as phy-handle and sfp/managed
properties are already defined.

phy-handle made optional
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265

property sfp/managed (which is included for mac subnode in yaml above):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137

changes:
v3:
- changed mmc pull-ups
- added patch for board binding (sent separately before)
- added pcie node in mt7986 (not yet again in r3)
- added dt overlays

Frank Wunderlich (5):
  arm64: dts: mt7986: add i2c node
  dt-bindings: arm64: dts: mediatek: add compatible for bananapi r3
  arm64: dts: mt7986: add Bananapi R3
  arm64: dts: mt7986: add PCIe nodes to BananaPi-R3
  arm64: dts: mt7986: add BPI-R3 nand/nor overlays

Sam Shih (6):
  arm64: dts: mt7986: harmonize device node order
  arm64: dts: mt7986: add spi related device nodes
  arm64: dts: mt7986: add usb related device nodes
  arm64: dts: mt7986: add crypto related device nodes
  arm64: dts: mt7986: add mmc related device nodes
  arm64: dts: mt7986: add pcie related device nodes

 .../devicetree/bindings/arm/mediatek.yaml     |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   4 +
 .../mediatek/mt7986a-bananapi-bpi-r3-emmc.dts |  31 ++
 .../mediatek/mt7986a-bananapi-bpi-r3-nand.dts |  53 ++
 .../mediatek/mt7986a-bananapi-bpi-r3-nor.dts  |  67 +++
 .../mediatek/mt7986a-bananapi-bpi-r3-sd.dts   |  25 +
 .../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 458 ++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts  | 264 ++++++++--
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     | 179 +++++++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts  |  83 +++-
 10 files changed, 1110 insertions(+), 55 deletions(-)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi

-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux