Re: [PATCH 1/2] arm64: dts: qcom: qcs404: align TLMM pin configuration with DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 04/11/2022 17:11, Krzysztof Kozlowski wrote:
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
  arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 20 +++---
  arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 52 +++++++--------
  arch/arm64/boot/dts/qcom/qcs404.dtsi         | 66 ++++++++++++--------
  3 files changed, 71 insertions(+), 67 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 08d5d51221cf..9c7d4e780357 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -37,54 +37,54 @@ phy1: phy@4 {
  };
&tlmm {
-	ethernet_defaults: ethernet-defaults {
-		int {
+	ethernet_defaults: ethernet-defaults-state {
+		int-pins {
  			pins = "gpio61";
  			function = "rgmii_int";
  			bias-disable;
  			drive-strength = <2>;
  		};
-		mdc {
+		mdc-pins {
  			pins = "gpio76";
  			function = "rgmii_mdc";
  			bias-pull-up;
  		};
-		mdio {
+		mdio-pins {
  			pins = "gpio75";
  			function = "rgmii_mdio";
  			bias-pull-up;
  		};
-		tx {
+		tx-pins {
  			pins = "gpio67", "gpio66", "gpio65", "gpio64";
  			function = "rgmii_tx";
  			bias-pull-up;
  			drive-strength = <16>;
  		};
-		rx {
+		rx-pins {
  			pins = "gpio73", "gpio72", "gpio71", "gpio70";
  			function = "rgmii_rx";
  			bias-disable;
  			drive-strength = <2>;
  		};
-		tx-ctl {
+		tx-ctl-pins {
  			pins = "gpio68";
  			function = "rgmii_ctl";
  			bias-pull-up;
  			drive-strength = <16>;
  		};
-		rx-ctl {
+		rx-ctl-pins {
  			pins = "gpio74";
  			function = "rgmii_ctl";
  			bias-disable;
  			drive-strength = <2>;
  		};
-		tx-ck {
+		tx-ck-pins {
  			pins = "gpio63";
  			function = "rgmii_ck";
  			bias-pull-up;
  			drive-strength = <16>;
  		};
-		rx-ck {
+		rx-ck-pins {
  			pins = "gpio69";
  			function = "rgmii_ck";
  			bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index dbbe1653718b..4d53cd544e41 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -229,7 +229,7 @@ &sdcc1 {
  };
&tlmm {
-	perst_state: perst {
+	perst_state: perst-state {
  		pins = "gpio43";
  		function = "gpio";
@@ -238,68 +238,63 @@ perst_state: perst {
  		output-low;
  	};
- sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
  			pins = "sdc1_clk";
  			bias-disable;
  			drive-strength = <16>;
  		};
- cmd {
+		cmd-pins {
  			pins = "sdc1_cmd";
  			bias-pull-up;
  			drive-strength = <10>;
  		};
- data {
+		data-pins {
  			pins = "sdc1_data";
  			bias-pull-up;
  			drive-strength = <10>;
  		};
- rclk {
+		rclk-pins {
  			pins = "sdc1_rclk";
  			bias-pull-down;
  		};
  	};
- sdc1_off: sdc1-off {
-		clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
  			pins = "sdc1_clk";
  			bias-disable;
  			drive-strength = <2>;
  		};
- cmd {
+		cmd-pins {
  			pins = "sdc1_cmd";
  			bias-pull-up;
  			drive-strength = <2>;
  		};
- data {
+		data-pins {
  			pins = "sdc1_data";
  			bias-pull-up;
  			drive-strength = <2>;
  		};
- rclk {
+		rclk-pins {
  			pins = "sdc1_rclk";
  			bias-pull-down;
  		};
  	};
- usb3_id_pin: usb3-id-pin {
-		pinmux {
-			pins = "gpio116";
-			function = "gpio";
-		};
+	usb3_id_pin: usb3-id-state {
+		pins = "gpio116";
+		function = "gpio";
- pinconf {
-			pins = "gpio116";
-			drive-strength = <2>;
-			bias-pull-up;
-			input-enable;
-		};
+		drive-strength = <2>;
+		bias-pull-up;
+		input-enable;
  	};
  };
@@ -366,31 +361,28 @@ &wifi {
  /* PINCTRL - additions to nodes defined in qcs404.dtsi */
&blsp1_uart2_default {
-	rx {
+	rx-pins {
  		drive-strength = <2>;
  		bias-disable;
  	};
- tx {
+	tx-pins {
  		drive-strength = <2>;
  		bias-disable;
  	};
  };
&blsp1_uart3_default {
-	cts {
-		pins = "gpio84";
+	cts-pins {
  		bias-disable;
  	};
- rts-tx {
-		pins = "gpio85", "gpio82";
+	rts-tx-pins {
  		drive-strength = <2>;
  		bias-disable;
  	};
- rx {
-		pins = "gpio83";
+	rx-pins {
  		bias-pull-up;
  	};
  };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 80f2d05595fa..577d76662468 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -593,118 +593,130 @@ tlmm: pinctrl@1000000 {
  			interrupt-controller;
  			#interrupt-cells = <2>;
- blsp1_i2c0_default: blsp1-i2c0-default {
+			blsp1_i2c0_default: blsp1-i2c0-default-state {
  				pins = "gpio32", "gpio33";
  				function = "blsp_i2c0";
  			};
- blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
  				pins = "gpio24", "gpio25";
  				function = "blsp_i2c1";
  			};
- blsp1_i2c2_default: blsp1-i2c2-default {
-				sda {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				sda-pins {
  					pins = "gpio19";
  					function = "blsp_i2c_sda_a2";
  				};
- scl {
+				scl-pins {
  					pins = "gpio20";
  					function = "blsp_i2c_scl_a2";
  				};
  			};
- blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
  				pins = "gpio84", "gpio85";
  				function = "blsp_i2c3";
  			};
- blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
  				pins = "gpio117", "gpio118";
  				function = "blsp_i2c4";
  			};
- blsp1_uart0_default: blsp1-uart0-default {
+			blsp1_uart0_default: blsp1-uart0-default-state {
  				pins = "gpio30", "gpio31", "gpio32", "gpio33";
  				function = "blsp_uart0";
  			};
- blsp1_uart1_default: blsp1-uart1-default {
+			blsp1_uart1_default: blsp1-uart1-default-state {
  				pins = "gpio22", "gpio23";
  				function = "blsp_uart1";
  			};
- blsp1_uart2_default: blsp1-uart2-default {
-				rx {
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
  					pins = "gpio18";
  					function = "blsp_uart_rx_a2";
  				};
- tx {
+				tx-pins {
  					pins = "gpio17";
  					function = "blsp_uart_tx_a2";
  				};
  			};
- blsp1_uart3_default: blsp1-uart3-default {
-				pins = "gpio82", "gpio83", "gpio84", "gpio85";
-				function = "blsp_uart3";
+			blsp1_uart3_default: blsp1-uart3-default-state {
+				cts-pins {
+					pins = "gpio84";
+					function = "blsp_uart3";
+				};
+
+				rts-tx-pins {
+					pins = "gpio85", "gpio82";
+					function = "blsp_uart3";
+				};
+
+				rx-pins {
+					pins = "gpio83";
+					function = "blsp_uart3";
+				};
  			};
- blsp2_i2c0_default: blsp2-i2c0-default {
+			blsp2_i2c0_default: blsp2-i2c0-default-state {
  				pins = "gpio28", "gpio29";
  				function = "blsp_i2c5";
  			};
- blsp1_spi0_default: blsp1-spi0-default {
+			blsp1_spi0_default: blsp1-spi0-default-state {
  				pins = "gpio30", "gpio31", "gpio32", "gpio33";
  				function = "blsp_spi0";
  			};
- blsp1_spi1_default: blsp1-spi1-default {
-				mosi {
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				mosi-pins {
  					pins = "gpio22";
  					function = "blsp_spi_mosi_a1";
  				};
- miso {
+				miso-pins {
  					pins = "gpio23";
  					function = "blsp_spi_miso_a1";
  				};
- cs_n {
+				cs-n-pins {
  					pins = "gpio24";
  					function = "blsp_spi_cs_n_a1";
  				};
- clk {
+				clk-pins {
  					pins = "gpio25";
  					function = "blsp_spi_clk_a1";
  				};
  			};
- blsp1_spi2_default: blsp1-spi2-default {
+			blsp1_spi2_default: blsp1-spi2-default-state {
  				pins = "gpio17", "gpio18", "gpio19", "gpio20";
  				function = "blsp_spi2";
  			};
- blsp1_spi3_default: blsp1-spi3-default {
+			blsp1_spi3_default: blsp1-spi3-default-state {
  				pins = "gpio82", "gpio83", "gpio84", "gpio85";
  				function = "blsp_spi3";
  			};
- blsp1_spi4_default: blsp1-spi4-default {
+			blsp1_spi4_default: blsp1-spi4-default-state {
  				pins = "gpio37", "gpio38", "gpio117", "gpio118";
  				function = "blsp_spi4";
  			};
- blsp2_spi0_default: blsp2-spi0-default {
+			blsp2_spi0_default: blsp2-spi0-default-state {
  				pins = "gpio26", "gpio27", "gpio28", "gpio29";
  				function = "blsp_spi5";
  			};
- blsp2_uart0_default: blsp2-uart0-default {
+			blsp2_uart0_default: blsp2-uart0-default-state {
  				pins = "gpio26", "gpio27", "gpio28", "gpio29";
  				function = "blsp_uart5";
  			};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux