Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5 MHz. Thus, we use a DT property, which is "clock-frequency", to work with it at boot time. The default 2.5 MHz would be set if the property is not pressent. Also, factor out mdio enable/disable functions due to the api change since 253761a0e61b7. Changelog: --- v3 --- 1. Fix coding style, and make probing of the driver fail if MDC overflow --- v2 --- 1. Use clock-frequency, as defined in mdio.yaml, to configure MDIO clock. 2. Only print out frequency if it is set to a non-standard value. 3. Reduce the scope of axienet_mdio_enable and remove axienet_mdio_disable because no one really uses it anymore. Andy Chiu (3): net: axienet: Unexport and remove unused mdio functions net: axienet: set mdio clock according to bus-frequency dt-bindings: describe the support of "clock-frequency" in mdio .../bindings/net/xilinx_axienet.txt | 2 + drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 - .../net/ethernet/xilinx/xilinx_axienet_mdio.c | 57 +++++++++++-------- 3 files changed, 34 insertions(+), 27 deletions(-) -- 2.36.0
