From: Thierry Reding <treding@xxxxxxxxxx>
Convert the Tegra XUSB controller bindings from the free-form text
format to json-schema.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Wayne, going forward it might make sense for you to pick this up into
your Tegra234 series and add the Tegra234 bindings on top of this.
Changes in v2:
- use minItems/maxItems/items instead of contains/anyOf for phy-names
- add missing compatible string to USB device example
- drop unneeded phys property description
- drop unneeded USB bus properties
- add reference to usb-xhci.yaml
.../bindings/usb/nvidia,tegra124-xusb.txt | 132 -----------
.../bindings/usb/nvidia,tegra124-xusb.yaml | 202 +++++++++++++++++
.../bindings/usb/nvidia,tegra186-xusb.yaml | 181 +++++++++++++++
.../bindings/usb/nvidia,tegra194-xusb.yaml | 187 ++++++++++++++++
.../bindings/usb/nvidia,tegra210-xusb.yaml | 207 ++++++++++++++++++
5 files changed, 777 insertions(+), 132 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
deleted file mode 100644
index 5bfcc0b4d6b9..000000000000
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-NVIDIA Tegra xHCI controller
-============================
-
-The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
-the Tegra XUSB pad controller.
-
-Required properties:
---------------------
-- compatible: Must be:
- - Tegra124: "nvidia,tegra124-xusb"
- - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
- - Tegra210: "nvidia,tegra210-xusb"
- - Tegra186: "nvidia,tegra186-xusb"
-- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
- registers and XUSB IPFS registers.
-- reg-names: Must contain the following entries:
- - "hcd"
- - "fpci"
- - "ipfs"
-- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - xusb_host
- - xusb_host_src
- - xusb_falcon_src
- - xusb_ss
- - xusb_ss_src
- - xusb_ss_div2
- - xusb_hs_src
- - xusb_fs_src
- - pll_u_480m
- - clk_m
- - pll_e
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - xusb_host
- - xusb_ss
- - xusb_src
- Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
-- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
- configure the USB pads used by the XHCI controller
-
-For Tegra124 and Tegra132:
-- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
-- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
-
-For Tegra210:
-- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
-
-For Tegra210 and Tegra186:
-- power-domains: A list of PM domain specifiers that reference each power-domain
- used by the xHCI controller. This list must comprise of a specifier for the
- XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
- ../arm/tegra/nvidia,tegra20-pmc.txt for details.
-- power-domain-names: A list of names that represent each of the specifiers in
- the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
- represent the power-domains XUSBA and XUSBC, respectively. See
- ../power/power_domain.txt for details.
-
-Optional properties:
---------------------
-- phys: Must contain an entry for each entry in phy-names.
- See ../phy/phy-bindings.txt for details.
-- phy-names: Should include an entry for each PHY used by the controller. The
- following PHYs are available:
- - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
- - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
- - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
- usb3-3
- - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
-
-Example:
---------
-
- usb@0,70090000 {
- compatible = "nvidia,tegra124-xusb";
- reg = <0x0 0x70090000 0x0 0x8000>,
- <0x0 0x70098000 0x0 0x1000>,
- <0x0 0x70099000 0x0 0x1000>;
- reg-names = "hcd", "fpci", "ipfs";
-
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
- <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
- <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
- <&tegra_car TEGRA124_CLK_XUSB_SS>,
- <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
- <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
- <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
- <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
- <&tegra_car TEGRA124_CLK_PLL_U_480M>,
- <&tegra_car TEGRA124_CLK_CLK_M>,
- <&tegra_car TEGRA124_CLK_PLL_E>;
- clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
- "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
- "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
- "clk_m", "pll_e";
- resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
- reset-names = "xusb_host", "xusb_ss", "xusb_src";
-
- nvidia,xusb-padctl = <&padctl>;
-
- phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
- <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
- <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
- phy-names = "usb2-1", "usb2-2", "usb3-0";
-
- avddio-pex-supply = <&vdd_1v05_run>;
- dvddio-pex-supply = <&vdd_1v05_run>;
- avdd-usb-supply = <&vdd_3v3_lp0>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-pll-erefe-supply = <&avdd_1v05_run>;
- avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
- hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
- hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
- };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
new file mode 100644
index 000000000000..4a6616bf9bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 xHCI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+ - Jon Hunter <jonathanh@xxxxxxxxxx>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+ exposed by the Tegra XUSB pad controller.
+
+properties:
+ # required
+ compatible:
+ oneOf:
+ - description: NVIDIA Tegra124
+ const: nvidia,tegra124-xusb
+
+ - description: NVIDIA Tegra132
+ items:
+ - const: nvidia,tegra132-xusb
+ - const: nvidia,tegra124-xusb
+
+ reg:
+ items:
+ - description: base and length of the xHCI host registers
+ - description: base and length of the XUSB FPCI registers
+ - description: base and length of the XUSB IPFS registers
+
+ reg-names:
+ items:
+ - const: hcd
+ - const: fpci
+ - const: ipfs
+
+ interrupts:
+ items:
+ - description: xHCI host interrupt
+ - description: mailbox interrupt
+
+ clocks:
+ items:
+ - description: XUSB host clock
+ - description: XUSB host source clock
+ - description: XUSB Falcon source clock
+ - description: XUSB SuperSpeed clock
+ - description: XUSB SuperSpeed clock divider
+ - description: XUSB SuperSpeed source clock
+ - description: XUSB HighSpeed clock source
+ - description: XUSB FullSpeed clock source
+ - description: USB PLL
+ - description: reference clock
+ - description: I/O PLL
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_host_src
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_div2
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ resets:
+ items:
+ - description: reset for the XUSB host controller
+ - description: reset for the SuperSpeed logic
+ - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+ reset-names:
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+ - const: xusb_src
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the XUSB pad controller that is used to configure
+ the USB pads used by the XHCI controller
+
+ # optional
+ phys:
+ minItems: 1
+ maxItems: 7
+
+ phy-names:
+ minItems: 1
+ maxItems: 7
+ items:
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - hsic-0
+ - hsic-1
+ - usb3-0
+ - usb3-1
+
+ avddio-pex-supply:
+ description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+ dvddio-pex-supply:
+ description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
+
+ avdd-usb-supply:
+ description: USB controller power supply. Must supply 3.3 V.
+
+ avdd-pll-utmip-supply:
+ description: UTMI PLL power supply. Must supply 1.8 V.
+
+ avdd-pll-erefe-supply:
+ description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+ avdd-usb-ss-pll-supply:
+ description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+ hvdd-usb-ss-supply:
+ description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
+
+ hvdd-usb-ss-pll-e-supply:
+ description: High-voltage PLLE power supply. Must supply 3.3 V.
+
+allOf:
+ - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - nvidia,xusb-padctl
+ - phys
+ - phy-names
+ - avddio-pex-supply
+ - dvddio-pex-supply
+ - avdd-usb-supply
+ - hvdd-usb-ss-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@70090000 {
+ compatible = "nvidia,tegra124-xusb";
+ reg = <0x70090000 0x8000>,
+ <0x70098000 0x1000>,
+ <0x70099000 0x1000>;
+ reg-names = "hcd", "fpci", "ipfs";
+
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+ <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+ <&tegra_car TEGRA124_CLK_CLK_M>,
+ <&tegra_car TEGRA124_CLK_PLL_E>;
+ clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
+ "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
+ "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
+ "clk_m", "pll_e";
+ resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
+ reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+ nvidia,xusb-padctl = <&padctl>;
+
+ phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
+ <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
+ <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
+ phy-names = "usb2-1", "usb2-2", "usb3-0";
+
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-usb-supply = <&vdd_3v3_lp0>;
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+ hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+ hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
new file mode 100644
index 000000000000..7126d137133a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 xHCI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+ - Jon Hunter <jonathanh@xxxxxxxxxx>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+ exposed by the Tegra XUSB pad controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra186-xusb
+
+ reg:
+ items:
+ - description: base and length of the xHCI host registers
+ - description: base and length of the XUSB FPCI registers
+
+ reg-names:
+ items:
+ - const: hcd
+ - const: fpci
+
+ interrupts:
+ items:
+ - description: xHCI host interrupt
+ - description: mailbox interrupt
+
+ clocks:
+ items:
+ - description: XUSB host clock
+ - description: XUSB Falcon source clock
+ - description: XUSB SuperSpeed clock
+ - description: XUSB SuperSpeed source clock
+ - description: XUSB HighSpeed clock source
+ - description: XUSB FullSpeed clock source
+ - description: USB PLL
+ - description: reference clock
+ - description: I/O PLL
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ interconnects:
+ items:
+ - description: read client
+ - description: write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ iommus:
+ maxItems: 1
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the XUSB pad controller that is used to configure
+ the USB pads used by the XHCI controller
+
+ phys:
+ minItems: 1
+ maxItems: 7
+
+ phy-names:
+ minItems: 1
+ maxItems: 7
+ items:
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - hsic-0
+ - usb3-0
+ - usb3-1
+ - usb3-2
+
+ power-domains:
+ description: A list of PM domain specifiers that reference each power-
+ domain used by the xHCI controller. This list must comprise of a
+ specifier for the XUSBA and XUSBC power-domains.
+
+ See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
+ for details.
+ items:
+ - description: XUSBC power domain
+ - description: XUSBA power domain
+
+ power-domain-names:
+ description: A list of names that represent each of the specifiers in the
+ 'power-domains' property. See ../power/power_domain.txt for details.
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+
+ dvddio-pex-supply:
+ description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+ hvddio-pex-supply:
+ description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+ avdd-usb-supply:
+ description: USB controller power supply. Must supply 3.3 V.
+
+ avdd-pll-utmip-supply:
+ description: UTMI PLL power supply. Must supply 1.8 V.
+
+ avdd-pll-uerefe-supply:
+ description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+ dvdd-usb-ss-pll-supply:
+ description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+ hvdd-usb-ss-pll-e-supply:
+ description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+ - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra186-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra186-mc.h>
+ #include <dt-bindings/power/tegra186-powergate.h>
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ usb@3530000 {
+ compatible = "nvidia,tegra186-xusb";
+ reg = <0x03530000 0x8000>,
+ <0x03538000 0x1000>;
+ reg-names = "hcd", "fpci";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+ <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA186_CLK_XUSB_SS>,
+ <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA186_CLK_CLK_M>,
+ <&bpmp TEGRA186_CLK_XUSB_FS>,
+ <&bpmp TEGRA186_CLK_PLLU>,
+ <&bpmp TEGRA186_CLK_CLK_M>,
+ <&bpmp TEGRA186_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+ "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+ "pll_u_480m", "clk_m", "pll_e";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+ <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+ nvidia,xusb-padctl = <&padctl>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
+ phy-names = "usb2-0", "usb2-1", "usb3-0";
+ };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
new file mode 100644
index 000000000000..7697a0dbae15
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 xHCI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+ - Jon Hunter <jonathanh@xxxxxxxxxx>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+ exposed by the Tegra XUSB pad controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra194-xusb
+
+ reg:
+ items:
+ - description: base and length of the xHCI host registers
+ - description: base and length of the XUSB FPCI registers
+
+ reg-names:
+ items:
+ - const: hcd
+ - const: fpci
+
+ interrupts:
+ items:
+ - description: xHCI host interrupt
+ - description: mailbox interrupt
+
+ clocks:
+ items:
+ - description: XUSB host clock
+ - description: XUSB Falcon source clock
+ - description: XUSB SuperSpeed clock
+ - description: XUSB SuperSpeed source clock
+ - description: XUSB HighSpeed clock source
+ - description: XUSB FullSpeed clock source
+ - description: USB PLL
+ - description: reference clock
+ - description: I/O PLL
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ interconnects:
+ items:
+ - description: read client
+ - description: write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ iommus:
+ maxItems: 1
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the XUSB pad controller that is used to configure
+ the USB pads used by the XHCI controller
+
+ phys:
+ minItems: 1
+ maxItems: 8
+
+ phy-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - usb2-3
+ - usb3-0
+ - usb3-1
+ - usb3-2
+ - usb3-3
+
+ power-domains:
+ description: A list of PM domain specifiers that reference each power-
+ domain used by the xHCI controller. This list must comprise of a
+ specifier for the XUSBA and XUSBC power-domains.
+
+ See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
+ for details.
+ items:
+ - description: XUSBC power domain
+ - description: XUSBA power domain
+
+ power-domain-names:
+ description: A list of names that represent each of the specifiers in the
+ 'power-domains' property. See ../power/power_domain.txt for details.
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+
+ dvddio-pex-supply:
+ description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+ hvddio-pex-supply:
+ description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+ avdd-usb-supply:
+ description: USB controller power supply. Must supply 3.3 V.
+
+ avdd-pll-utmip-supply:
+ description: UTMI PLL power supply. Must supply 1.8 V.
+
+ avdd-pll-uerefe-supply:
+ description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+ dvdd-usb-ss-pll-supply:
+ description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+ hvdd-usb-ss-pll-e-supply:
+ description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+ - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra194-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra194-mc.h>
+ #include <dt-bindings/power/tegra194-powergate.h>
+ #include <dt-bindings/reset/tegra194-reset.h>
+
+ usb@3610000 {
+ compatible = "nvidia,tegra194-xusb";
+ reg = <0x03610000 0x40000>,
+ <0x03600000 0x10000>;
+ reg-names = "hcd", "fpci";
+
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+ <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA194_CLK_XUSB_SS>,
+ <&bpmp TEGRA194_CLK_CLK_M>,
+ <&bpmp TEGRA194_CLK_XUSB_FS>,
+ <&bpmp TEGRA194_CLK_UTMIPLL>,
+ <&bpmp TEGRA194_CLK_CLK_M>,
+ <&bpmp TEGRA194_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src",
+ "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480m", "clk_m",
+ "pll_e";
+ interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+ <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+
+ nvidia,xusb-padctl = <&xusb_padctl>;
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+ };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
new file mode 100644
index 000000000000..5c8bef1f482b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 xHCI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+ - Jon Hunter <jonathanh@xxxxxxxxxx>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+ exposed by the Tegra XUSB pad controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra210-xusb
+
+ reg:
+ items:
+ - description: base and length of the xHCI host registers
+ - description: base and length of the XUSB FPCI registers
+ - description: base and length of the XUSB IPFS registers
+
+ reg-names:
+ items:
+ - const: hcd
+ - const: fpci
+ - const: ipfs
+
+ interrupts:
+ items:
+ - description: xHCI host interrupt
+ - description: mailbox interrupt
+
+ clocks:
+ items:
+ - description: XUSB host clock
+ - description: XUSB host source clock
+ - description: XUSB Falcon source clock
+ - description: XUSB SuperSpeed clock
+ - description: XUSB SuperSpeed clock divider
+ - description: XUSB SuperSpeed source clock
+ - description: XUSB HighSpeed clock source
+ - description: XUSB FullSpeed clock source
+ - description: USB PLL
+ - description: reference clock
+ - description: I/O PLL
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_host_src
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_div2
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ resets:
+ items:
+ - description: reset for the XUSB host controller
+ - description: reset for the SuperSpeed logic
+ - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+ reset-names:
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+ - const: xusb_src
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the XUSB pad controller that is used to configure
+ the USB pads used by the XHCI controller
+
+ phys:
+ minItems: 1
+ maxItems: 9
+
+ phy-names:
+ minItems: 1
+ maxItems: 9
+ items:
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - usb2-3
+ - hsic-0
+ - usb3-0
+ - usb3-1
+ - usb3-2
+ - usb3-3
+
+ power-domains:
+ description: A list of PM domain specifiers that reference each power-
+ domain used by the xHCI controller. This list must comprise of a
+ specifier for the XUSBA and XUSBC power-domains.
+
+ See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
+ for details.
+ items:
+ - description: XUSBC power domain
+ - description: XUSBA power domain
+
+ power-domain-names:
+ description: A list of names that represent each of the specifiers in the
+ 'power-domains' property. See ../power/power_domain.txt for details.
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+
+ dvddio-pex-supply:
+ description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+ hvddio-pex-supply:
+ description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+ avdd-usb-supply:
+ description: USB controller power supply. Must supply 3.3 V.
+
+ avdd-pll-utmip-supply:
+ description: UTMI PLL power supply. Must supply 1.8 V.
+
+ avdd-pll-uerefe-supply:
+ description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+ dvdd-usb-ss-pll-supply:
+ description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+ hvdd-usb-ss-pll-e-supply:
+ description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+ - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@70090000 {
+ compatible = "nvidia,tegra210-xusb";
+ reg = <0x70090000 0x8000>,
+ <0x70098000 0x1000>,
+ <0x70099000 0x1000>;
+ reg-names = "hcd", "fpci", "ipfs";
+
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+ <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_SS>,
+ <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+ <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+ <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+ <&tegra_car TEGRA210_CLK_CLK_M>,
+ <&tegra_car TEGRA210_CLK_PLL_E>;
+ clock-names = "xusb_host", "xusb_host_src",
+ "xusb_falcon_src", "xusb_ss",
+ "xusb_ss_div2", "xusb_ss_src",
+ "xusb_hs_src", "xusb_fs_src",
+ "pll_u_480m", "clk_m", "pll_e";
+ resets = <&tegra_car 89>, <&tegra_car 156>,
+ <&tegra_car 143>;
+ reset-names = "xusb_host", "xusb_ss", "xusb_src";
+ power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+ power-domain-names = "xusb_host", "xusb_ss";
+
+ nvidia,xusb-padctl = <&padctl>;
+
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+ "usb3-1";
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ avdd-usb-supply = <&vdd_3v3_sys>;
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+ hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usb955,9ff";
+ reg = <1>;
+ };
+ };
--
2.38.1
