[PATCH v4 08/13] dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors

[Cosmin Tanislav <demonsingur@xxxxxxxxx>]

From: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>

Excitation cannot be set to auto-range when using a custom thermistor
or Steinhart sensor type. Default it to 1000nA to match the driver
and remove the auto-range value from the enum.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
---
 .../bindings/iio/temperature/adi,ltc2983.yaml          | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index b603219fb0c9..1b6a11f2aa9d 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -378,6 +378,11 @@ patternProperties:
             adi,sensor-type:
               const: 26
         then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
           required:
             - adi,custom-steinhart
       - if:
@@ -385,6 +390,11 @@ patternProperties:
             adi,sensor-type:
               const: 27
         then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
           required:
             - adi,custom-thermistor
 
-- 
2.38.1