On 02/11/2022 14:35, Rob Herring wrote:
>
> On Wed, 02 Nov 2022 12:12:11 -0400, Krzysztof Kozlowski wrote:
>> Some boards use SJA1105 Ethernet Switch with SPI CPOL, so document this
>> to fix dtbs_check warnings:
>>
>> arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/
>
>
> ethernet-switch@1: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'fsl,spi-cs-sck-delay', 'fsl,spi-sck-cs-delay', 'spi-cpha' were unexpected)
> arch/arm/boot/dts/ls1021a-tsn.dtb
I'll add cpha, but fsl,spi-cs-sck-delay are coming from unconverted
schema - spi-fsl-dspi.txt.
>
> switch@0: Unevaluated properties are not allowed ('clocks', 'reset-gpios', 'spi-cpha' were unexpected)
> arch/arm/boot/dts/imx6qp-prtwd3.dtb
> arch/arm/boot/dts/stm32mp151a-prtt1c.dtb
>
Best regards,
Krzysztof
