On Wed, 02 Nov 2022 12:12:11 -0400, Krzysztof Kozlowski wrote:
> Some boards use SJA1105 Ethernet Switch with SPI CPOL, so document this
> to fix dtbs_check warnings:
>
> arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/
ethernet-switch@1: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'fsl,spi-cs-sck-delay', 'fsl,spi-sck-cs-delay', 'spi-cpha' were unexpected)
arch/arm/boot/dts/ls1021a-tsn.dtb
switch@0: Unevaluated properties are not allowed ('clocks', 'reset-gpios', 'spi-cpha' were unexpected)
arch/arm/boot/dts/imx6qp-prtwd3.dtb
arch/arm/boot/dts/stm32mp151a-prtt1c.dtb
