From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
As we are using two fixed regulators for Verdin USB_1_EN (SODIMM 155)
and Verdin USB_2_EN (SODIMM 185), those should be muxed as GPIOs rather
than OTG_PWR.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index cc3b0725ce06..97e88440a251 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -1221,7 +1221,7 @@ pinctrl_uart4: uart4grp {
pinctrl_usb1_vbus: usb1vbusgrp {
fsl,pins =
- <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x19>; /* SODIMM 155 */
+ <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x106>; /* SODIMM 155 */
};
/* USB_1_ID */
@@ -1232,7 +1232,7 @@ pinctrl_usb_1_id: usb1idgrp {
pinctrl_usb2_vbus: usb2vbusgrp {
fsl,pins =
- <MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19>; /* SODIMM 185 */
+ <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x106>; /* SODIMM 185 */
};
/* On-module Wi-Fi */
--
2.36.1
