[PATCH v7 0/2] arm64: dts: qcom: add dts for sa8540p-ride board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series introduces the Qualcomm sa8540p-ride automotive development
  board, also called as Qdrive-3 board.

Changes in v7:
- Put the smpi bus related pmic changes in sseparate dtsi files(Konrad)
- Mention allowed regulator modes via DT property regulator-allowed-modes
  (Konrad and Brian)
- Remove unused ldo nodes vreg_l3c and vreg_l10c(Shazad)

Changes in v6:
- Introduced the new dts for the board, rather than moving common nodes
  between this one and SA8295 ADP board into dtsi file(Bjorn)
- Drop 'adp' term to imply it being unrelated with ADP board(Internal
  discussion with Bjorn)
- Removed Acked-by(Krzysztof) tag in dt-binding document, due to content
  change.
- Not including Reviewed-by(Krzysztof), because of the content change.

Changes in v5:
- Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective
  board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts.
  Took inputs from Shazad Hussain in this regard(John)
- Added more description of the board differences(John)
- Not including Reviewed-by for Krzysztof, because of the new changes to
  be reviewed.
- Removed Reported-by tag(John).

Changes in v4:
 - Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board.
 - Removed usb_1 relared nodes, as usb1 doesn't have any port connected
   on Qdrive3 board.
 - Added Reported-by tag for Shazad(for ufs and usb_1 node removals)

Changes in v3:
 - Added Acked-by tag (Krzysztof)
 - Renamed dtsi to sa8540p-adp.dtsi (John)
 - Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John)
 - Added cover letter

changes in v2:
- Make dt-binding patch as the first one in the patch set
- Add , after year 2022, in the license header

Initial version:
- Move the common nodes to sa8540p-adp.dtsi, and create qrive-3 board
  specific file sa8540p-adp-ride.dts.


Parikshit Pareek (2):
  dt-bindings: arm: qcom: Document additional sa8540p device
  arm64: dts: qcom: add SA8540P ride(Qdrive-3)

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm8450a.dtsi         |  77 ++++++
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts     | 227 ++++++++++++++++++
 4 files changed, 306 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8450a.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts

-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux