Re: [PATCH 14/15] scsi: ufs: ufs-qcom: Add support for finding HS gear on new UFS versions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Oct 30, 2022 at 12:48:21AM +0300, Dmitry Baryshkov wrote:
> On 29/10/2022 17:16, Manivannan Sadhasivam wrote:
> > Starting from UFS controller v4, Qcom supports dual gear mode (i.e., the
> > controller/PHY can be configured to run in two gear speeds). But that
> > requires an agreement between the UFS controller and the UFS device.
> > This commit finds the max gear supported by both controller and device
> > then decides which one to use.
> > 
> > UFS controller's max gear can be read from the REG_UFS_PARAM0 register and
> > UFS device's max gear can be read from the "max-gear" devicetree property.
> > 
> > The UFS PHY also needs to be configured with the decided gear using the
> > phy_set_mode_ext() API.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > ---
> >   drivers/ufs/host/ufs-qcom.c | 35 ++++++++++++++++++++++++++++++++---
> >   drivers/ufs/host/ufs-qcom.h |  4 ++++
> >   2 files changed, 36 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> > index f952cc76919f..268463e92d67 100644
> > --- a/drivers/ufs/host/ufs-qcom.c
> > +++ b/drivers/ufs/host/ufs-qcom.c
> > @@ -281,6 +281,9 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba)
> >   static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba, u32 hs_gear)
> >   {
> >   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> > +	struct device *dev = hba->dev;
> > +	u32 max_gear, hcd_max_gear, reg;
> > +	int ret;
> >   	if (host->hw_ver.major == 0x1) {
> >   		/*
> > @@ -292,8 +295,33 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba, u32 hs_gear)
> >   		 */
> >   		if (hs_gear > UFS_HS_G2)
> >   			return UFS_HS_G2;
> > +	} else if (host->hw_ver.major > 0x3) {
> > +		/*
> > +		 * Starting from UFS controller v4, Qcom supports dual gear mode (i.e., the
> > +		 * controller/PHY can be configured to run in two gear speeds). But that
> > +		 * requires an agreement between the UFS controller and the device. Below
> > +		 * code tries to find the max gear of both and decides which gear to use.
> > +		 *
> > +		 * First get the max gear supported by the UFS device if available.
> > +		 * If the property is not defined in devicetree, then use the default gear.
> > +		 */
> > +		ret = of_property_read_u32(dev->of_node, "max-gear", &max_gear);
> > +		if (ret)
> > +			goto err_out;
> 
> Can we detect the UFS device's max gear somehow? If not, the 'max-gear'
> property name doesn't sound good. Maybe calling it 'device-gear' would be
> better.
> 
> > +
> > +		/* Next get the max gear supported by the UFS controller */
> > +		reg = ufshcd_readl(hba, REG_UFS_PARAM0);
> > +		hcd_max_gear = UFS_QCOM_MAX_GEAR(reg);
> > +
> > +		/*
> > +		 * Now compare both the gears. If the max gear supported by the UFS device
> > +		 * is compatible with UFS controller, then use the UFS device's max gear
> > +		 * speed. Otherwise, use the UFS controller supported max gear speed.
> > +		 */
> > +		return (max_gear <= hcd_max_gear) ? max_gear : hcd_max_gear;
> 
> return max(max_gear, hcd_max_gear); ?
> 

min() should work...

Thanks,
Mani

> >   	}
> > +err_out:
> >   	/* Default is HS-G3 */
> >   	return UFS_HS_G3;
> >   }
> > @@ -303,7 +331,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> >   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> >   	struct phy *phy = host->generic_phy;
> >   	int ret;
> > -	bool is_rate_B = UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B;
> > +	u32 hs_gear;
> >   	/* Reset UFS Host Controller and PHY */
> >   	ret = ufs_qcom_host_reset(hba);
> > @@ -311,8 +339,9 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> >   		dev_warn(hba->dev, "%s: host reset returned %d\n",
> >   				  __func__, ret);
> > -	if (is_rate_B)
> > -		phy_set_mode(phy, PHY_MODE_UFS_HS_B);
> > +	/* UFS_HS_G2 is used here since that's the least gear supported by legacy Qcom platforms */
> > +	hs_gear = ufs_qcom_get_hs_gear(hba, UFS_HS_G2);
> > +	phy_set_mode_ext(phy, PHY_MODE_UFS_HS_B, hs_gear);
> >   	/* phy initialization - calibrate the phy */
> >   	ret = phy_init(phy);
> > diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> > index 214ea50acab9..c93bc52ea848 100644
> > --- a/drivers/ufs/host/ufs-qcom.h
> > +++ b/drivers/ufs/host/ufs-qcom.h
> > @@ -89,6 +89,10 @@ enum {
> >   #define TMRLUT_HW_CGC_EN	BIT(6)
> >   #define OCSC_HW_CGC_EN		BIT(7)
> > +/* bit definitions for REG_UFS_PARAM0 */
> > +#define MAX_HS_GEAR_MASK	GENMASK(6, 4)
> > +#define UFS_QCOM_MAX_GEAR(x)	FIELD_GET(MAX_HS_GEAR_MASK, (x))
> > +
> >   /* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
> >   #define TEST_BUS_SUB_SEL_MASK	GENMASK(4, 0)  /* All XXX_SEL fields are 5 bits wide */
> 
> -- 
> With best wishes
> Dmitry
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux