Hi!
On Thu, Oct 23, 2014 at 06:51:06PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
(...)
> diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> new file mode 100644
> index 0000000..bc24a2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> @@ -0,0 +1,53 @@
> +Altera FPGA/HPS Bridge Driver
> +
> +This driver manages a bridge between a FPGA and a host processor system (HPS).
> +User space can enable or disable the bridge by writing a "1" or a "0",
> +respectively, to its enable file under bridge's entry in
> +/sys/class/fpga-bridge. Typically, one disables the bridges before
> +reprogramming the FPGA. Once the FPGA is reprogrammed, the bridges are
> +reenabled.
> +
NAK.
This is all linux specific and doesn't belong here.
> +Required properties:
> +
> + - compatible : should contain one of:
> + "altr,socfpga-hps2fpga-bridge"
> + "altr,socfpga-lwhps2fpga-bridge"
> + "altr,socfpga-fpga2hps-bridge"
> +
> + - clocks : clocks used by this module
> +
> + - altr,l3-syscon : phandle of the l3 interconnect module
> +
L3 shouldn't be a syscon. Have you tried dumping the regmap in the debugfs if L3
is a syscon? Doesn't work.
> +Optional properties:
> + - label : name that you want this bridge to show up as under
> + /sys/class/fpga-bridge. Default is br<device#> if this is
> + not specified.
> +
Why? Linux-specific.
> + - init-val : 0 if driver should disable bridge at startup
> + 1 if driver should enable bridge at startup
> + driver leaves bridge in current state if property not
> + specified.
> +
Configuration in the DT? Really?
> +Example:
> + hps_fpgabridge0: fpgabridge@0 {
> + compatible = "altr,socfpga-hps2fpga-bridge";
> + label = "hps2fpga";
> + altr,l3-syscon = <&l3regs>;
> + clocks = <&l4_main_clk>;
> + init-val = <1>;
> + };
> +
> + hps_fpgabridge1: fpgabridge@1 {
> + compatible = "altr,socfpga-lwhps2fpga-bridge";
> + label = "lwhps2fpga";
> + altr,l3-syscon = <&l3regs>;
> + clocks = <&l4_main_clk>;
> + init-val = <0>;
> + };
> +
> + hps_fpgabridge2: fpgabridge@2 {
> + compatible = "altr,socfpga-fpga2hps-bridge";
> + label = "fpga2hps";
> + altr,l3-syscon = <&l3regs>;
> + clocks = <&l4_main_clk>;
> + };
The bridges are the buses into the FPGA. This has to be accomodated.
The bridges have two specified memory ranges: one the address space
of the bus, the second the register space for configuration.
This binding does NOT correctly describe the hardware. Sorry.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
