Re: [PATCH] ARM: dts: hip04: NAND controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2014年10月23日 17:32, Haojian Zhuang wrote:
On Thu, Oct 23, 2014 at 4:24 PM, Zhou Wang <wangzhou.bry@xxxxxxxxx> wrote:
This patch adds dts support of NAND flash controller for Hisilicon Soc Hip04.
The patch is based on v3.18-rc1. I have tested that NAND flash controller
works fine in Hip04 D01 board.

Signed-off-by: Zhou Wang <wangzhou.bry@xxxxxxxxx>
---
  arch/arm/boot/dts/hip04.dtsi |   30 ++++++++++++++++++++++++++++++
  1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 93b6c90..642a160 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -263,5 +263,35 @@
                         interrupts = <0 372 4>;
                 };

+               nand: nand@4020000 {
+                       compatible = "hisilicon,504-nfc";
+                       reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+                       interrupts = <0 379 4>;
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "none";
+                       hisi,nand-ecc-bits = <0>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "nand_text";
+                               reg = <0x00000000 0x00400000>;
+                       };
+
+                       partition@00400000 {
+                               label = "nand_monitor";
+                               reg = <0x00400000 0x00400000>;
+                       };
+
+                       partition@00800000 {
+                               label = "nand_kernel";
+                               reg = <0x00800000 0x00800000>;
+                       };
+
+                       partition@01000000 {
+                               label = "nand_fs";
+                               reg = <0x01000000 0x1f000000>;
+                       };

Partitions are different on different boards. But nand controller is
same on each chip. You
should define nand controller in soc dtsi file, and define partition
in board dts file.


My mistake. I will move the partition information to board dts file.
Thanks a lot, Haojian.

Kind Regards
Zhou Wang
Regards
Haojian


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux