On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> Add support for ADC7 block available in PMK8280 for reading the
> temperature via the AMUX pins.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> index 4a3464f5e6e9..3c56e4cb5b5b 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> @@ -75,6 +75,15 @@ pmk8280_pon_resin: resin {
> status = "disabled";
> };
> };
> +
> + pmk8280_vadc: adc@3100 {
> + compatible = "qcom,spmi-adc7";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> + #io-channel-cells = <1>;
Maybe having interrupts after reg and all the -cells below that would look better.
For the contents though:
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> + };
> };
>
> pmc8280_1: pmic@1 {
