On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> Add support for temperature alarm feature in the PM8280_{1/2} PMICs.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> index 24836b6b9bbc..5de47b1434a4 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> @@ -33,6 +33,13 @@ pmc8280_1: pmic@1 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pm8280_1_temp_alarm: temp-alarm@a00 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0xa00>;
> + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> pmc8280_1_gpios: gpio@8800 {
> compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
> reg = <0x8800>;
> @@ -78,6 +85,13 @@ pmc8280_2: pmic@3 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pm8280_2_temp_alarm: temp-alarm@a00 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0xa00>;
> + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> pmc8280_2_gpios: gpio@8800 {
> compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
> reg = <0x8800>;
