On 26/10/2022 15:04, Melody Olvera wrote: > Add documentation details for device tree bindings for QDU1000 and QRU1000 > TLMM devices. Just "Add Devicetree bindings for QDU1000 and QRU1000 TLMM devices." Subject - drop redundant second bindings. > > Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx> > --- > .../bindings/pinctrl/qcom,qdu1000-tlmm.yaml | 135 ++++++++++++++++++ > 1 file changed, 135 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml > new file mode 100644 > index 000000000000..a2ca4d59e2e0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml > @@ -0,0 +1,135 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block > + > +maintainers: > + - Melody Olvera <quic_molvera@xxxxxxxxxxx> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block (TLMM) found Drop "This binding describes" IOW, just take a peak at current bindings in next. > + in the QDU1000 and QRU1000 platforms. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + items: No items. > + - const: qcom,qdu1000-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + > + gpio-reserved-ranges: > + minItems: 1 > + maxItems: 75 > + > + gpio-line-names: > + maxItems: 151 > + > + "#gpio-cells": true > + gpio-ranges: true > + wakeup-parent: true > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-qdu1000-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-qdu1000-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-qdu1000-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" This is not fixed. > + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ] > + minItems: 1 > + maxItems: 36 > + > + function: Best regards, Krzysztof
